Error Message Cannot access a disposed object Object name SslStream

[Daryl-Lynch-Bzy]

Hello

I am receiving this error message while refreshing a Power BI PBIX in Power BI Desktop.  The PBIX file is reading data from various Power BI Dataflows.  The Dataflows and Dataset are hosted in EM1 premium capacity.  The Dataflows and Dataset are refreshing normally in the Power BI Service, I am only encountering the error message when refreshing in Power BI Desktop.  This is happening on two separate computers.

The size of the Power BI pbix file is 17MB, approx 30MB in Vertipax Engine.

Feedback Type:
Frown (Error)

Error Message:
Cannot access a disposed object.
Object name: 'SslStream'.

Stack Trace:
Microsoft.Mashup.Host.Document.SerializedException
at Microsoft.Mashup.Evaluator.EvaluationHost.OnException(IEngineHost engineHost, IMessageChannel channel, ExceptionMessage message)
at Microsoft.Mashup.Evaluator.MessageHandlers.TryDispatch(IMessageChannel channel, Message message)
at Microsoft.Mashup.Evaluator.MessageHandlers.Dispatch(IMessageChannel channel, Message message)
at Microsoft.Mashup.Evaluator.ChannelMessenger.ChannelMessageHandlers.TryDispatch(IMessageChannel channel, Message message)
at Microsoft.Mashup.Evaluator.MessageHandlers.Dispatch(IMessageChannel channel, Message message)
at Microsoft.Mashup.Evaluator.Interface.IMessageChannelExtensions.WaitFor[T](IMessageChannel channel)
at Microsoft.Mashup.Evaluator.MessageBasedInputStream.ReadNextChunkAndCheckIfClosed()
at Microsoft.Mashup.Evaluator.MessageBasedInputStream.ReadNextChunk()
at Microsoft.Mashup.Common.ChunkedInputStream.ReadByte()
at Microsoft.OleDb.Serialization.PageReader.ReadInt32()
at Microsoft.OleDb.Serialization.ColumnsPage.Deserialize(PageReader reader)
at Microsoft.OleDb.Serialization.OleDbPageReader.Read(ColumnsPage page)
at Microsoft.Mashup.Common.IPageReaderExtensions.NotifyingPageReader.Read(IPage page)
at Microsoft.Mashup.Engine.Interface.Tracing.TracingPageReader.Read(IPage page)
at Microsoft.Mashup.Evaluator.SoftCancellingDocumentEvaluator.DataReaderSourceEvaluation.SoftCancellingDataReaderSource.SoftCancellingPageReader.Read(IPage page)
at Microsoft.Mashup.OleDbProvider.DataHost.NonBufferingMashupEvaluator.MashupEvaluation.ExceptionResolverPageReader.Read(IPage page)
at Microsoft.Mashup.Common.IPageReaderExtensions.NotifyingEndOfAllResultsPageReader.Read(IPage page)
at Microsoft.Mashup.Engine.Interface.Tracing.TracingPageReader.Read(IPage page)
at Microsoft.Mashup.Common.IPageReaderExtensions.NotifyingEndOfAllResultsPageReader.Read(IPage page)
at Microsoft.OleDb.Serialization.PageReaderRowset.ReadNextPage()
at Microsoft.OleDb.Serialization.PageReaderRowset.Microsoft.OleDb.IRowset.GetNextRows(HCHAPTER hchapter, DBROWOFFSET lRowsOffset, DBROWCOUNT cRows, DBCOUNTITEM& countRowsObtained, HROW** pRows)
at Microsoft.OleDb.Rowset.Microsoft.OleDb.IRowset.GetNextRows(HCHAPTER hReserved, DBROWOFFSET lRowsOffset, DBROWCOUNT cRows, DBCOUNTITEM& countRowsObtained, HROW** pRows)
at Microsoft.Mashup.OleDbProvider.TracingRowset.Microsoft.OleDb.IRowset.GetNextRows(HCHAPTER hReserved, DBROWOFFSET lRowsOffset, DBROWCOUNT cRows, DBCOUNTITEM& countRowsObtained, HROW** pRows)

Stack Trace Message:
Cannot access a disposed object.
Object name: 'SslStream'.

Invocation Stack Trace:
at Microsoft.Mashup.Host.Document.ExceptionExtensions.GetCurrentInvocationStackTrace()
at Microsoft.Mashup.Client.UI.Shared.StackTraceInfo..ctor(String exceptionStackTrace, String invocationStackTrace, String exceptionMessage)
at Microsoft.PowerBI.Client.Windows.Telemetry.PowerBIUserFeedbackServices.GetStackTraceInfo(Exception e)
at Microsoft.PowerBI.Client.Windows.Telemetry.PowerBIUserFeedbackServices.ReportException(IWindowHandle activeWindow, IUIHost uiHost, FeedbackPackageInfo feedbackPackageInfo, Exception e, Boolean useGDICapture)
at Microsoft.Mashup.Client.UI.Shared.UnexpectedExceptionHandler.<>c__DisplayClass14_0.<HandleException>b__0()
at Microsoft.Mashup.Host.Document.SynchronizationContextExtensions.<>c__DisplayClass2_1.<SendAndMarshalExceptions>b__0(Object null)
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
at Microsoft.Mashup.Client.UI.Windows.DialogWindowBase.ShowModal(IWindowHandle windowHandle)
at Microsoft.Mashup.Client.UI.Shared.WindowManager.ShowModal[T](T dialog, Func`1 showModalFunction)
at Microsoft.PowerBI.Client.Windows.FloatingDialog.KoLoadToReportDialog.TryShowDialog(Report report, IExceptionHandler exceptionHandler, IPowerBIWindowService windowService, IPowerBIQueryUIService queryServices, IDesktopModelingHost modelingHost, LocalizedString title, LoadToModelContext loadToModelContext)
at Microsoft.PowerBI.Client.Windows.FloatingDialog.KoLoadToReportDialog.<>c__DisplayClass16_0.<TryShowDialogForQueries>b__0()
at Microsoft.PowerBI.Client.Windows.Report.<>c__DisplayClass64_0`1.<SynchronizeLooselyWithQueries>b__0()
at Microsoft.PowerBI.Client.Windows.Report.<SynchronizeLooselyWithQueriesAsync>d__65`1.MoveNext()
at System.Runtime.CompilerServices.AsyncTaskMethodBuilder`1.Start[TStateMachine](TStateMachine& stateMachine)
at Microsoft.PowerBI.Client.Windows.Report.SynchronizeLooselyWithQueriesAsync[T](Func`1 getTask)
at Microsoft.PowerBI.Client.Windows.Report.SynchronizeLooselyWithQueries[T](Func`1 action)
at Microsoft.PowerBI.Client.Windows.Commands.ApplicationCommands.DataImportCommands.RefreshAllQueries(IPowerBIWindowService windowService, IExceptionHandler exceptionHandler, RefreshAllQueriesParameters parameters)
at Microsoft.Mashup.Host.Document.ExceptionHandlerExtensions.HandleExceptions(IExceptionHandler exceptionHandler, Action action)
at Microsoft.Practices.Prism.Commands.DelegateCommandBase.<>c__DisplayClass4_0.<.ctor>b__0(Object arg)
at Microsoft.PowerBI.Client.Windows.Commands.CompositeCommand`1.Execute(ICommand command, Object parameter)
at Microsoft.Practices.Prism.Commands.CompositeCommand.Execute(Object parameter)
at Microsoft.PowerBI.Client.Windows.Commands.CompositeCommand`1.Execute(T parameter)
at Microsoft.PowerBI.Client.Windows.CommandStoreHostService.<ExecuteCore>d__14.MoveNext()
at System.Runtime.CompilerServices.AsyncTaskMethodBuilder.Start[TStateMachine](TStateMachine& stateMachine)
at Microsoft.PowerBI.Client.Windows.CommandStoreHostService.ExecuteCore(String commandId, String parameterJson, Int64 promiseHandle)
at Microsoft.PowerBI.Client.Windows.IExceptionHandlerExtensions.<HandleAwaitableAsyncExceptions>d__1.MoveNext()
at System.Runtime.CompilerServices.AsyncTaskMethodBuilder.Start[TStateMachine](TStateMachine& stateMachine)
at Microsoft.PowerBI.Client.Windows.IExceptionHandlerExtensions.HandleAwaitableAsyncExceptions(IExceptionHandler exceptionHandler, Func`1 asyncFunc)
at Microsoft.PowerBI.Client.Windows.IExceptionHandlerExtensions.<HandleAsyncExceptions>d__0.MoveNext()
at System.Runtime.CompilerServices.AsyncVoidMethodBuilder.Start[TStateMachine](TStateMachine& stateMachine)
at Microsoft.PowerBI.Client.Windows.IExceptionHandlerExtensions.HandleAsyncExceptions(IExceptionHandler exceptionHandler, Func`1 asyncFunc)
at Microsoft.Mashup.Host.Document.ExceptionHandlerExtensions.HandleExceptions(IExceptionHandler exceptionHandler, Action action)
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
at Microsoft.Mashup.Client.UI.Shared.WindowManager.ShowModal[T](T dialog, Func`1 showModalFunction)
at Microsoft.PowerBI.Client.Program.<>c__DisplayClass4_1.<Main>b__2()
at Microsoft.PowerBI.Client.Windows.IExceptionHandlerExtensions.<>c__DisplayClass3_0.<HandleExceptionsWithNestedTasks>b__0()
at Microsoft.Mashup.Host.Document.ExceptionHandlerExtensions.HandleExceptions(IExceptionHandler exceptionHandler, Action action)
at Microsoft.PowerBI.Client.Program.Main(String[] args)


PowerBINonFatalError:
{"AppName":"PBIDesktop","AppVersion":"2.103.881.0","ModuleName":"","Component":"Microsoft.Mashup.Evaluator.EvaluationHost","Error":"Microsoft.Mashup.Host.Document.SerializedException - Microsoft.Mashup.Evaluator.Interface.ErrorException","MethodDef":"OnException","ErrorOffset":""}

Snapshot Trace Logs:
C:\Users\lynda\Microsoft\Power BI Desktop Store App\FrownSnapShotdab60a95-51b2-4c9c-aba2-8204fced066b.zip

Model Default Mode:
Import

Model Version:
PowerBI_V3

Performance Trace Logs:
C:\Users\lynda\Microsoft\Power BI Desktop Store App\PerformanceTraces.zip

Enabled Preview Features:
PBI_compositeModelsOverAS
PBI_dynamicParameters
PBI_enhancedTooltips
PBI_enableWebView2
PBI_mobileAuthoringFormattingUI
PBI_useModernFormatPane
PBI_sparklines
PBI_scorecardVisual

Disabled Preview Features:
PBI_shapeMapVisualEnabled
PBI_SpanishLinguisticsEnabled
PBI_qnaLiveConnect
PBI_azureMapVisual
PBI_dataPointLassoSelect
PQ_WebView2Connector
PBI_lineChartError

Disabled DirectQuery Options:
TreatHanaAsRelationalSource

Cloud:
GlobalCloud

PowerBINonFatalError_ErrorDescription:
Microsoft.Mashup.Evaluator.Interface.ErrorException

PowerBIUserFeedbackServices_IsReported:
True

Formulas:

omitted... 

[Anonymous]

Hi , @Daryl-Lynch-Bzy 

You can clear your Desktop cache and then try refresh in Desktop again . 

In Options=> Data Load=> Data Cache Management Options .

Best Regards,
Community Support Team _ Ailsa Tao

[Daryl-Lynch-Bzy]

@Anonymous  - I have cleared the following but it is still not working:

[Daryl-Lynch-Bzy]

@Anonymous  - note I tried a new PBIX to get a new Query.  I still encounter the same error message.  There is nothing complex in the Dataflow query.

Feedback Type:
Frown (Error)

Error Message:
Cannot access a disposed object.
Object name: 'SslStream'.

Stack Trace:
Microsoft.Mashup.Host.Document.SerializedException
at Microsoft.Mashup.Evaluator.EvaluationHost.OnException(IEngineHost engineHost, IMessageChannel channel, ExceptionMessage message)
at Microsoft.Mashup.Evaluator.MessageHandlers.TryDispatch(IMessageChannel channel, Message message)
at Microsoft.Mashup.Evaluator.MessageHandlers.Dispatch(IMessageChannel channel, Message message)
at Microsoft.Mashup.Evaluator.ChannelMessenger.ChannelMessageHandlers.TryDispatch(IMessageChannel channel, Message message)
at Microsoft.Mashup.Evaluator.MessageHandlers.Dispatch(IMessageChannel channel, Message message)
at Microsoft.Mashup.Evaluator.Interface.IMessageChannelExtensions.WaitFor[T](IMessageChannel channel)
at Microsoft.Mashup.Evaluator.MessageBasedInputStream.ReadNextChunkAndCheckIfClosed()
at Microsoft.Mashup.Evaluator.MessageBasedInputStream.ReadNextChunk()
at Microsoft.Mashup.Common.ChunkedInputStream.ReadByte()
at Microsoft.OleDb.Serialization.PageReader.ReadInt32()
at Microsoft.OleDb.Serialization.ColumnsPage.Deserialize(PageReader reader)
at Microsoft.OleDb.Serialization.OleDbPageReader.Read(ColumnsPage page)
at Microsoft.Mashup.Common.IPageReaderExtensions.NotifyingPageReader.Read(IPage page)
at Microsoft.Mashup.Engine.Interface.Tracing.TracingPageReader.Read(IPage page)
at Microsoft.Mashup.Evaluator.SoftCancellingDocumentEvaluator.DataReaderSourceEvaluation.SoftCancellingDataReaderSource.SoftCancellingPageReader.Read(IPage page)
at Microsoft.Mashup.OleDbProvider.DataHost.NonBufferingMashupEvaluator.MashupEvaluation.ExceptionResolverPageReader.Read(IPage page)
at Microsoft.Mashup.Common.IPageReaderExtensions.NotifyingEndOfAllResultsPageReader.Read(IPage page)
at Microsoft.Mashup.Engine.Interface.Tracing.TracingPageReader.Read(IPage page)
at Microsoft.Mashup.Common.IPageReaderExtensions.NotifyingEndOfAllResultsPageReader.Read(IPage page)
at Microsoft.OleDb.Serialization.PageReaderRowset.ReadNextPage()
at Microsoft.OleDb.Serialization.PageReaderRowset.Microsoft.OleDb.IRowset.GetNextRows(HCHAPTER hchapter, DBROWOFFSET lRowsOffset, DBROWCOUNT cRows, DBCOUNTITEM& countRowsObtained, HROW** pRows)
at Microsoft.OleDb.Rowset.Microsoft.OleDb.IRowset.GetNextRows(HCHAPTER hReserved, DBROWOFFSET lRowsOffset, DBROWCOUNT cRows, DBCOUNTITEM& countRowsObtained, HROW** pRows)
at Microsoft.Mashup.OleDbProvider.TracingRowset.Microsoft.OleDb.IRowset.GetNextRows(HCHAPTER hReserved, DBROWOFFSET lRowsOffset, DBROWCOUNT cRows, DBCOUNTITEM& countRowsObtained, HROW** pRows)

Stack Trace Message:
Cannot access a disposed object.
Object name: 'SslStream'.

Invocation Stack Trace:
at Microsoft.Mashup.Host.Document.ExceptionExtensions.GetCurrentInvocationStackTrace()
at Microsoft.Mashup.Client.UI.Shared.StackTraceInfo..ctor(String exceptionStackTrace, String invocationStackTrace, String exceptionMessage)
at Microsoft.PowerBI.Client.Windows.Telemetry.PowerBIUserFeedbackServices.GetStackTraceInfo(Exception e)
at Microsoft.PowerBI.Client.Windows.Telemetry.PowerBIUserFeedbackServices.ReportException(IWindowHandle activeWindow, IUIHost uiHost, FeedbackPackageInfo feedbackPackageInfo, Exception e, Boolean useGDICapture)
at Microsoft.Mashup.Client.UI.Shared.UnexpectedExceptionHandler.<>c__DisplayClass14_0.<HandleException>b__0()
at Microsoft.Mashup.Host.Document.SynchronizationContextExtensions.<>c__DisplayClass2_1.<SendAndMarshalExceptions>b__0(Object null)
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
at Microsoft.Mashup.Client.UI.Windows.DialogWindowBase.ShowModal(IWindowHandle windowHandle)
at Microsoft.Mashup.Client.UI.Shared.WindowManager.ShowModal[T](T dialog, Func`1 showModalFunction)
at Microsoft.PowerBI.Client.Windows.FloatingDialog.KoLoadToReportDialog.TryShowDialog(Report report, IExceptionHandler exceptionHandler, IPowerBIWindowService windowService, IPowerBIQueryUIService queryServices, IDesktopModelingHost modelingHost, LocalizedString title, LoadToModelContext loadToModelContext)
at Microsoft.PowerBI.Client.Windows.FloatingDialog.KoLoadToReportDialog.<>c__DisplayClass16_0.<TryShowDialogForQueries>b__0()
at Microsoft.PowerBI.Client.Windows.Report.<>c__DisplayClass64_0`1.<SynchronizeLooselyWithQueries>b__0()
at Microsoft.PowerBI.Client.Windows.Report.<SynchronizeLooselyWithQueriesAsync>d__65`1.MoveNext()
at System.Runtime.CompilerServices.AsyncTaskMethodBuilder`1.Start[TStateMachine](TStateMachine& stateMachine)
at Microsoft.PowerBI.Client.Windows.Report.SynchronizeLooselyWithQueriesAsync[T](Func`1 getTask)
at Microsoft.PowerBI.Client.Windows.Report.SynchronizeLooselyWithQueries[T](Func`1 action)
at Microsoft.PowerBI.Client.Windows.PowerBIDataImporter.LoadQueries(IEnumerable`1 queriesToLoad)
at Microsoft.PowerBI.Client.Windows.PowerBIDataImporter.OnImportSuccess(IEnumerable`1 addedQueries, DataImportDestination destination)
at Microsoft.Mashup.Client.UI.Shared.DataImporter.ProcessImportedQueries(IEnumerable`1 importedQueries, DataImportDestination destination)
at Microsoft.Mashup.Client.UI.Shared.DataImporter.ImportNavigationSource(Query query)
at Microsoft.Mashup.Client.UI.Shared.DataImporter.OnGetPreviewResult(PreviewResult preview, Query query, String sourceID, String formulaTitle, Nullable`1 explicitImportDestination, Boolean isNewQuery, Boolean isFromEditor)
at Microsoft.Mashup.Client.UI.Shared.DataImporter.GetPreviewResult(Query query, String sourceID, String formulaTitle, Boolean isNewQuery, Boolean isFromEditor, Nullable`1 explicitImportDestination)
at Microsoft.Mashup.Client.UI.Shared.DataImporter.<>c__DisplayClass90_1.<OnQuerySettingsResolved>b__0()
at Microsoft.Mashup.Host.Document.ExceptionHandlerExtensions.HandleExceptions(IExceptionHandler exceptionHandler, Action action)
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
at Microsoft.Mashup.Client.UI.Shared.WindowManager.ShowModal[T](T dialog, Func`1 showModalFunction)
at Microsoft.PowerBI.Client.Program.<>c__DisplayClass4_1.<Main>b__2()
at Microsoft.PowerBI.Client.Windows.IExceptionHandlerExtensions.<>c__DisplayClass3_0.<HandleExceptionsWithNestedTasks>b__0()
at Microsoft.Mashup.Host.Document.ExceptionHandlerExtensions.HandleExceptions(IExceptionHandler exceptionHandler, Action action)
at Microsoft.PowerBI.Client.Program.Main(String[] args)


PowerBINonFatalError:
{"AppName":"PBIDesktop","AppVersion":"2.103.881.0","ModuleName":"","Component":"Microsoft.Mashup.Evaluator.EvaluationHost","Error":"Microsoft.Mashup.Host.Document.SerializedException - Microsoft.Mashup.Evaluator.Interface.ErrorException","MethodDef":"OnException","ErrorOffset":""}

Snapshot Trace Logs:
C:\Users\lynda\AppData\Local\Microsoft\Power BI Desktop\FrownSnapShot3316363e-9b5a-4e37-9ac1-573bb6e5a244.zip

Model Default Mode:
Empty

Model Version:
PowerBI_V1

Performance Trace Logs:
C:\Users\lynda\AppData\Local\Microsoft\Power BI Desktop\PerformanceTraces.zip

Enabled Preview Features:
PBI_enableWebView2
PBI_mobileAuthoringFormattingUI
PBI_useModernFormatPane
PBI_sparklines

Disabled Preview Features:
PBI_shapeMapVisualEnabled
PBI_SpanishLinguisticsEnabled
PBI_qnaLiveConnect
PBI_azureMapVisual
PBI_dataPointLassoSelect
PBI_compositeModelsOverAS
PBI_dynamicParameters
PBI_enhancedTooltips
PQ_WebView2Connector
PBI_scorecardVisual
PBI_lineChartError

Disabled DirectQuery Options:
TreatHanaAsRelationalSource

Cloud:
GlobalCloud

PowerBINonFatalError_ErrorDescription:
Microsoft.Mashup.Evaluator.Interface.ErrorException

PowerBIUserFeedbackServices_IsReported:
True

Formulas:


section Section1;

shared #"Bing Ads Data Keywords" = let
Source = PowerPlatform.Dataflows(null),
Workspaces = Source{[Id="Workspaces"]}[Data],
#"5c93c479-7d0e-4a41-9232-8f66ee65277e" = Workspaces{[workspaceId="5c93c479-7d0e-4a41-9232-8f66ee65277e"]}[Data],
#"0b519600-ff58-4545-ad65-9451e88cfa9d" = #"5c93c479-7d0e-4a41-9232-8f66ee65277e"{[dataflowId="0b519600-ff58-4545-ad65-9451e88cfa9d"]}[Data],
#"Bing Ads Data Keywords_" = #"0b519600-ff58-4545-ad65-9451e88cfa9d"{[entity="Bing Ads Data Keywords",version=""]}[Data]
in
#"Bing Ads Data Keywords_";

[Anonymous]

I'm having the same issue, starting a couple days ago. Clearing the cache also doesn't resolve the error. 

[rweigand]

I am also having this issue and it's very difficult to determine what the issue is. 

[Andrzej]

We seem to have the same issue, when trying to connect to a dataflow.

Several tables are taken from a dataflow - three tables return the above error upon refresh. The rest seems to refresh properly.

This occurs on only one computer - mine works fine.

[Anonymous]

Similar issue like described

[Daryl-Lynch-Bzy]

@Andrzej - you are only getting this message on one computer??? Unfortunately, it is happening on both my surface laptop and my virtual machine.  This is annoying especially since it is working in the Power BI Service.  So my work around is to refresh in Power BI and then export the PBIX to C drive to edit in Power BI Desktop.  I am luck that I can still download as I understand this can break.  

 @Anonymous - is there any update on this issue?

[Andrzej]

@Daryl-Lynch-Bzy,

Yes. One computer only.

We have 2 Power BI Developers - We tried different combinations with taking ownership of the dataflow.

Perhaps it is connected with Incremental Refresh - so far only the tables, that are using Incremental Refresh, seem to be affected.

It seems to be either account-related, PBI Desktop-related, or Environment-related, as it works perfectly within Power Bi Service.

We will attempt to disable incremental refresh on one table to check, whether this helps.

[Anonymous]

@Daryl-Lynch-Bzy, @Andrzej 

Performed the check mentioned by Andrzej

1. Disabled incremental refresh

2. took over dataflow

3. performed dataflow refresh (refresh failed)

4. checked the power query editor during edit of pbix file - same result (error with SsLStream)