Issues

gbaudouin79 · ‎05-01-2023

Hi everyone !🖐 Some users in my conpany have an issue with the Personalize This Visual pane. They can't make any personalisation because the pane display just the header (see below) I've never encounter this problem yet. Can someone help me one that ? Thanks, Guillaume

jaykayelsemicol · ‎04-20-2023

In Power BI Desktop I am running into an issue where I cannot format visualizations that are part of a group. When selecting the visualization in the group and navigating to the Format visual tab, no options are available and it says "Formatting options are unavailable for this visual". The only workaround is to ungroup the visualization, make formating changes, then re-group it with the other visualizations. This has been happening for the past week or two. Sometimes it will let me format visualizations in a group, but most of the time it shows the message below.

LPanas84 · ‎02-16-2023

The visualization used to embed power apps does not trigger the option to choose the option to create or use an existing application after adding columns - (Power BI Desktop Version: 2.114.664.0 64-bit (Feb2023))

Rdata · ‎02-22-2023

All pop-up windows are zoomed in and unusable. For example: when I have a table, and I click a column for conditional formatting, then click background color, the pop-up that should let me set the parameters is zoomed in, and I can't submit my choices because the edge of the pop-up cuts off part of the buttons. Otherwise, if I am refreshing the data the pop-up that tells me what % is done is too zoomed in to see any information. Zoomed-In Conditional Formatting Pop-up Window Zoomed-In Data Refresh Pop-Up WIndow The funny part is that I can pinch-to-zoom in even FURTHER, but I can't zoom OUT completely. Yes, I have triple-checked that I can't pinch-to-zoom out any further. Two-Finger-Zoomed In Even Further

cristianml · ‎08-11-2022

Hello, With August'22 version I have an issue when I try to apply changes or discard them. Seems not working neither:

rahulshevde · ‎03-14-2022

Power BI is experiencing a problem with WebView2 running Out of memory. We have identified some of the top causes of this and have the details below. If that does not address your Out of memory problem, we need your help to understand and fix this issue. If you are willing to help out, please reply on this thread or contact us at pbidesktopwebview2issues@service.microsoft.com Out of Memory cause: We recently migrated desktop to Webview2 from CefSharp and started seeing a lot of Out of Memory exceptions. We found one of the causes being custom visuals on the report. One of the major culprits is the “Smart Filter” custom visual by OKViz. This visuals has some heavy rendering code. There was a regression in Chromium which makes this problem worse. Having just one of this visual on the page for a column with 12k values, takes ~1400 mb and almost 60 sec to load For desktop, Cef version as of now is 89 which does not have this regression. Thus it does not reproduce in desktop with CefSharp. It can be reproduced in Edge and in Chrome. Webview2 is based on the latest chrome version and current chrome browser version is 99 both of which have this regression. Chrome has the fix for this : https://source.chromium.org/chromium/chromium/src/+/85cc07ed1dec997ba68942388158f6462d3a715e We verified on the Chrome canary channel that we do not run into this issue. For Webview2, this will be picked up in the Edge release 101 which is scheduled for last week of April. Possible workarounds till the fix rolls out to Chrome and Edge are not use these visuals limit the number of items in them Use Mozilla Firefox for service (Mozilla is not based on chromium) and turn off WebView2 in desktop.

Ricardoncjr · ‎04-16-2023

Idioma dos dash publicados em portugues Brasil, estão sendo exibidos no formato americano após atualização da Microsoft.

prempandey · ‎02-20-2023

Embedded Visio visual within a Power BI Desktop report is not visible anymore and data can not be assigned to the corresponding shapes. It worked perfectly before and not working in the latest version - 2.114.664.0 64bit (February 2023). Whenever I click on "View in Visio Online" the diagram appears and shows perfectly. Please share if there is any idea regarding this issue. Thank you

TiCordeiro · ‎10-18-2022

We have noticed that since the October 15th, we are no longer receiving emails with the map object animated on the report. When we access the report on cloud everything works well, also when we export the page using pdf format. This issue happens with all our reports. It seems to be a problem with the image format exportation.

Mohanad-Mustafa · ‎04-11-2022

Hello Team, I have a simple line chart that shows sales for the last three years and then I added the trend line from the analytics tab and I also have added a forecast trend line. It was working for the last two weeks then suddenly, it stopped working, get this error below:- If I download the report to my computer, and use power bi desktop app, the line chart works just fine, the forecast works and I don't get any error, it only stopped working on the cloud service in Power BI this morning. I am thinking this is a bug, I also have used a different dataset completely and tried replicating the issue and the line chart right away throws an error when I try to add the forecast line. The trend line is fine, its the forecast that drives the entire visual to throw an error and fail to display result. Note: I do have a Power BI Pro license Any suggestions please! Thank you Mohanad

Tiemen · ‎02-20-2023

Hello, After a page refresh the Power Automate visual in the Power BI service shows an error saying it is not certified. This doesn't seem right to me because it is an built-in visual. Can you look into this? Thanks! Best Regards, Tiemen

meburgos · ‎04-19-2023

How do you submit an error happening to a visual on the desktop app? I also googled online, and looks like only the community is a resource to submit any issues.

mostvp123 · ‎07-22-2022

The new update of the OKViz Bullet Chart (2.2.9.4) released on the 19th of July broke data labels & some things about states. It seems that if data labels are turned on, only the top category is displayed, and no data labels are shown either: Without data labels: With data labels: All formatting options in the data labels formatting category are also greyed out. This is a crucial issue that broke a number of dashboards and required a massive amount of manual intervention and fixes. Its also a shame the data labels can no longer be used as they were a key feature. There is also a new bug with the States feature. You can usually apply 5 states to the visual (above I've colored them red/amber/green). Before the update, you could have 5 separate colors based on 5 measures that you would add to the "States" visual settings. The 5th and final state, would respond to the measure you added. Now, the 5th and final state no longer pulls in the measure data, and just fills the full background. In the example above I've colored the 5th state white, and the 4th state uses a measure corresponding to my target + is green to achieve sort of what I used to have (banded states ending at the target). This means I've lost a color band and am restricted to 4 states only instead of 5. But to give you an idea of how it used to look: Before update: After update:

chrisbaker · ‎03-14-2023

I'm using a Gantt chart to track ownership of assets. All of the below have the same commencement date, and a few months different in end date. As you can see, the start points of the bars are not rendering consistently and some are defaulting to sharp instead of rounded corners. This appears to be a visual bug.

QC · ‎03-30-2023

Hi team, Since March 2023 update, PBI desktop has some serious bugs with W/H and position H/V controls of all visual. In screenshot below, you can see that the "Horizontal" control was marked in RED by PBI on a simple table visual. It doesn't matter if I decrease width to 40 or reduce horizontal number to 600, it will remain red, and the visual won't move as supposed to. This happens regularily, making the precision control under General pane impossible to use. Please fix this bug asap. Thanks,

beppe_62 · ‎11-22-2021

From today I realized that my reports published in the APP do not display a Custom Visual (DINAMIC KPI by Sereviso) which is displayed with the browser refresh (CTRL + F5). Everything works perfectly if I view the report instead of the same with the APP.

Frankie_Vannini · ‎11-17-2022

Hi there I've got a Dashbord where I use Microsoft ChicletSlicer 1.6.3. I've tried to update it to the latest version. Once loaded the new one (Version 2.0.0) it seems OK, however when I save the file the reopen it, while pressing the About Button on the visual I still have previous version displayed. So it seems the visual has not been updated, while instead if I try to update it again I've got the message "the report already contains a copy of this visual 2.0.0 ..." Just to double check if this is not a real problem, so the visual is updated even if the version displayed in the About is the old one Thanks in advance Krgds F

Haghsheno · ‎03-26-2023

Hallo Support, ich hoffe auf diesem Weg Hilfe zu bekommen. Aus einer Umfrage wird anhand eines Flows (Power Automate läuft fehlerfrei durch) die Daten in einer Power BI Datei visualisiert. Die Veröffentlichung (orangenes Icon) dieser Power BI Datei aktuslisiert sich jedoch nicht und zeigt diesen Fehler an: Fehler bei der Aktualisierung für dieses Modell. Fehler bei der Datenquelle: Bei der geplanten Aktualisierung ist offenbar ein Fehler aufgetreten, weil für mindestens eine Datenquelle Anmeldeinformationen fehlen. Um die Aktualisierung erneut zu starten, wechseln Sie zur Einstellungsseite dieses Datasets, und geben Sie Anmeldeinformationen für alle Datenquellen ein. Cluster-URI: WABI-GERMANY-WEST-CENTRAL-PRIMARY-redirect.analysis.windows.net Aktivitäts-ID: 00000000-0000-0000-0000-000000000000 Anforderungs-ID: ab0d9075-ce63-4168-951f-a6a36c92170a Zeit: 2023-03-24 16:45:47Z Kann mir jemand helfen? Viele Grüße

karma123 · ‎08-22-2022

Hi, Is there currently an issue on Power BI as when I am trying to filter the page and export to PDF, the filters are not being included in the PDF and all the data is showing. Does anyone know when this will be resolved? Thanks

hootdog · ‎03-16-2023

When publishing a report with matrix visuals into workspace or apps the visuals are shifted slightly left and up. This is obvious when a visual border is enabled on the visual and is frustrating because it makes the report look less polished and less usable for presentations for specific users.

Share your ideas and vote for future features

Personalize This Visual blank

BUG: "Formatting options are unavailable for this visual"

Power APP visual doesn't work properly in power bi desktop

Pop-Up Windows Zoomed In and Unusable

Apply changes not working

Power BI Desktop WebView2 Out Of Memory

Idioma pt-BR

Visio Visual not Working

Map not working on email subscription

Line Chart Forecast Throws An Error On Power BI Online Service

Power Automate visual not working in PBI service

Reporting issues on the Power Bi Desktop

OKViz Bullet Chart 2.2.9.4 new Update Broken - Data Labels & States

Gantt Chart 2.2.3 visual bug

Bug: Field Width/Height Control (all PBI visuals)

Browser refresh needed (CTRL+F5) to show a custom visual (Dynamic KPI Card by Sereviso) in my APPS

ChicletSlicer Visual not updated

Keine Aktualisierung der veröffentlichten Datensätze möglich

Export with Filter

Published reports using matrix visual are offset.

Helpful resources

Cannot switch off data labels on line chart when u...

Contributor role is able to manage dataset access ...

Y axis should correspond to the total of the stack...

Power BI Crashing!

ModelOperationFailedDueToInvalidCapacityException ...