Skip to main content
cancel
Showing results for 
Search instead for 
Did you mean: 

Shape the future of the Fabric Community! Your insights matter. That’s why we created a quick survey to learn about your experience finding answers to technical questions. Take survey.

Reply
ejafarov
Helper I
Helper I

Calculating employee tenure based on selected date

Hi dears,

 

I want to calculate employe tenure for both active and resigned employees from selected date from filter.If an employee is active, the formula will calculate the tenure by finding the difference between the start date and the selected date from the filter.


If an employee is resigned after selected date, the formula will calculate the tenure by finding the difference between the start date and the selected date
If an employee is resigned before selected date, the formula will calculate the tenure by finding the difference between the start date and resigned date
if selected date is before start date the tenure will be blank

 

 

the dax formula I wrote is below:


but when I make filter date it doesn't show the resigned employee tenure. COuld you please help?

 

Measured Tenure =

VAR SelectedDate = MAX(Teqvim[Date])

RETURN
CALCULATE (
AVERAGEX(
FILTER (
'Final',
Final[Start Date] <= SelectedDate
&& (ISBLANK(Final[Resignation date]) || Final[Resignation date] > SelectedDate)
),
SWITCH(
TRUE(),
SelectedDate < Final[Start Date], BLANK(),
SelectedDate < Final[Resignation date] || ISBLANK(Final[Resignation date]),
DATEDIFF(Final[Start Date], SelectedDate, MONTH),
DATEDIFF(Final[Start Date], Final[Resignation date], MONTH)
)
),
CROSSFILTER(Teqvim[Date], Final[Start Date], None)
)

2 ACCEPTED SOLUTIONS
MohammadLoran25
Super User
Super User

Hi @ejafarov ,

It is because of your FILTER function and the condition: Final[Resignation date] > SelectedDate

 

Try the measure below:

 

 

TenureNew =
CALCULATE(AVERAGEX (
    'Final',
    SWITCH (
        TRUE (),
        MAX ( DateTable[Date] ) < Final[Start Date], BLANK (),
        MAX ( DateTable[Date] ) < Final[Resignation date]
            || ISBLANK ( Final[Resignation date] ), DATEDIFF ( Final[Start Date], MAX ( DateTable[Date] ), MONTH ),
        DATEDIFF ( Final[Start Date], Final[Resignation date], MONTH )
    )
),
CROSSFILTER(Teqvim[Date], Final[Start Date], None)
)

 

 

If this answer solves your problem, please give it a thumbs up and mark it as an accepted solution so the others would find what they need easier.

Regards,
Loran

View solution in original post

tamerj1
Super User
Super User

Hi @ejafarov 
Please try

Measured Tenure =
VAR SelectedDate =
    MAX ( Teqvim[Date] )
VAR T1 =
    CALCULATETABLE ( Final, CROSSFILTER ( Teqvim[Date], Final[Start Date], NONE ) )
VAR T2 =
    FILTER ( T1, Final[Start Date] <= SelectedDate )
RETURN
    AVERAGEX (
        T2,
        VAR StartDate = Final[Start Date]
        VAR EndDate =
            COALESCE ( Final[Resignation Date], TODAY () )
        RETURN
            DATEDIFF ( StartDate, MIN ( EndDate, SelectedDate ), MONTH )
    )

View solution in original post

11 REPLIES 11
DragosR
New Member

Hello,

 

Can you please help with a similar situation as above, the only difference on my situation is that I need a measure to count the different tenures in time?

 

Also, need to show the past YOY, MOM and YTD, MTD values for the tenures.

 

Can I use instead of AverageX, the CountX?

 

Data set looks like this:

 

Employee ID, Hire Date (d mmmm yyyy), Termination Date (same as Hire Date), Tenure in months (date diff between hire date and today), Tenure Range calculated as below:

SWITCH(TRUE(), 'Employees HHP'[Tenure] <= 3, "0-3 months", 'Employees HHP'[Tenure] <= 6, "3-6 months", 'Employees HHP'[Tenure] <= 12, "6-12 months", 'Employees HHP'[Tenure] > 12, "12 plus")
 
Need to show the tenure in buckets as above (3-6, 12 plus etc.) but not "3 6 months" shown as a total in a period of time (in different days, different values, in different months, diff values etc.), shown dinamic (or incremental) and not static values.
 
Thanks in advance!

 

tamerj1
Super User
Super User

Hi @ejafarov 
Please try

Measured Tenure =
VAR SelectedDate =
    MAX ( Teqvim[Date] )
VAR T1 =
    CALCULATETABLE ( Final, CROSSFILTER ( Teqvim[Date], Final[Start Date], NONE ) )
VAR T2 =
    FILTER ( T1, Final[Start Date] <= SelectedDate )
RETURN
    AVERAGEX (
        T2,
        VAR StartDate = Final[Start Date]
        VAR EndDate =
            COALESCE ( Final[Resignation Date], TODAY () )
        RETURN
            DATEDIFF ( StartDate, MIN ( EndDate, SelectedDate ), MONTH )
    )

Dears, 

How can I find employee tenure 12 months before from selected date?

The below formula does not work correctly.

 

Tenure for 12 months before =
VAR SelectedDate = MAX(Teqvim[Date])
VAR RelevantPeriodStart = EDATE(SelectedDate, -12)
VAR T1 = CALCULATETABLE(Final, CROSSFILTER(Teqvim[Date], Final[Start Date], NONE))
VAR T2 = FILTER(T1, Final[Start Date] <= SelectedDate && Final[Start Date] >= RelevantPeriodStart)
RETURN
AVERAGEX(
T2,
VAR StartDate = Final[Start Date]
VAR EndDate = COALESCE(Final[Resignation Date], TODAY())
RETURN DATEDIFF(StartDate, MIN(EndDate, SelectedDate), MONTH)
)

@ejafarov 

1-In your date table create a calculated column:

YearMonthIndex=YEAR(DateTable[Date])*12+MONTH(DateTable[Date])

 

2-A measure as below:

Measure12Months =
CALCULATE (
    [TenureNew],
    FILTER (
        ALL ( DateTable ),
        DateTable[YearMonthIndex] < MAX ( DateTable[YearMonthIndex] )
            && DateTable[YearMonthIndex]
                >= MAX ( DateTable[YearMonthIndex] ) - 12
    )
)

Which TenureNew is the measure of my previous response.

Measure12Months =
CALCULATE (
    [TenureNew],
    FILTER (
        ALL ( Teqvim[Date] ),
        Teqvim[Date] < MAX (Teqvim[YearMonthIndex] )
            && Teqvim[Date]
                >= MAX ( Teqvim[YearMonthIndex] ) - 12
    )
) it gives me a blank

Thanks dear @MohammadLoran25 MohammadLoran25, 
id modified it. could you please help?

Measure12MonthsTenure =
VAR CurrentYearMonthIndex = MAX(Teqvim[YearMonthIndex])
RETURN
CALCULATE (
    [Measured Tenure],
    FILTER (
        ALL ( Teqvim ),
        Teqvim[YearMonthIndex] < CurrentYearMonthIndex
            && Teqvim[YearMonthIndex] >= CurrentYearMonthIndex - 12
    )
)

I think it gives me the wrong value. the logic is that
 
if the employee is resigned before the selected date of 12 months the tenure will be different between the start date and resigned date , else will be a different start selected date
if the employee start date is before selected date of 12 months before it will blank

 

@ejafarov 

Oh I think I misunderstood it.

It seems that whay you need is the Tenure measure for parallel period?

For example you want to compare the tenure of Jan2023 with Jan2022 (12months before Jan2023).

 

Right?

dear @MohammadLoran25 , thanks for your great support.

 

I want to write a measure that calculates an employee's tenure 12 months before the date I select from the filter. For example, if I select 31.12.2022 from the date filter, I want to calculate the tenure for the employee as of 01.01.2022.

For instance, let's say Jon was hired on 01/01/2020 and is still working. If the date 31.12.2022 is filtered, I would calculate the tenure as of 01.01.2022 by finding the month difference between 01.01.2022 and 01.01.2020.

Here's the condition: if the employee resigned before the selected date of 12 months, the tenure will be different between the start date and the resignation date. Otherwise, it will be different from the start date selected if the employee's start date is before the selected date of 12 months before.

Could you please help?

You're welcome @ejafarov ,

Follow these steps:

1-In your date table, create a calculated column:

YearMonthIndex = (DateTable[Year])*12+DateTable[Month]

2-In your final table create these 2 calculated columns:

StartYearMonthIndex = YEAR(Final[Start Date])*12+MONTH(Final[Start Date])
ResignYearMonthIndex = YEAR(Final[Resignation Date])*12+MONTH(Final[Resignation Date])

 

3-Then Create the measure:

 

Tenure12Months =
CALCULATE (
    AVERAGEX (
        'Final',
        SWITCH (
            TRUE (),
            MAX ( DateTable[YearMonthIndex] ) < Final[StartYearMonthIndex] - 11, BLANK (),
            Final[ResignYearMonthIndex]
                < MAX ( DateTable[YearMonthIndex] ) - 11
                && NOT ISBLANK ( Final[Resignation date] ), DATEDIFF ( Final[Start Date], Final[Resignation date], MONTH ),
            Final[StartYearMonthIndex]
                < MAX ( DateTable[YearMonthIndex] ) - 11
                || (
                    ISBLANK ( Final[Resignation date] )
                        && Final[StartYearMonthIndex]
                            < MAX ( DateTable[YearMonthIndex] ) - 11
                ),
                DATEDIFF (
                    Final[Start Date],
                    CALCULATE (
                        MIN ( DateTable[Date] ),
                        FILTER (
                            ALL ( DateTable ),
                            DateTable[YearMonthIndex]
                                = MAX ( DateTable[YearMonthIndex] ) - 11
                        )
                    ),
                    MONTH
                )
        )
    ),
    CROSSFILTER ( DateTable[Date], Final[Start Date], NONE )
)

 

I Checked it and it worked for both your Senario that you just mentioned.

TenureNew12MonthsBefore =
VAR SelectedDate = MAX(Teqvim[Date])
VAR Date12MonthsBefore = EOMONTH(SelectedDate - 365, 0)
RETURN
CALCULATE(
    AVERAGEX(
        'Final',
        SWITCH(
            TRUE(),
            Final[Start Date] > Date12MonthsBefore, BLANK(),
            SelectedDate < Final[Resignation date] || ISBLANK(Final[Resignation date]),
                DATEDIFF(Final[Start Date], Date12MonthsBefore, MONTH),
            DATEDIFF(Final[Start Date], Final[Resignation date], MONTH)
        )
    ),
    CROSSFILTER(Teqvim[Date], Final[Start Date], None),
    FILTER(ALL(Teqvim), Teqvim[Date] = SelectedDate)
)

I tried this I think it gives me wrong number
MohammadLoran25
Super User
Super User

Hi @ejafarov ,

It is because of your FILTER function and the condition: Final[Resignation date] > SelectedDate

 

Try the measure below:

 

 

TenureNew =
CALCULATE(AVERAGEX (
    'Final',
    SWITCH (
        TRUE (),
        MAX ( DateTable[Date] ) < Final[Start Date], BLANK (),
        MAX ( DateTable[Date] ) < Final[Resignation date]
            || ISBLANK ( Final[Resignation date] ), DATEDIFF ( Final[Start Date], MAX ( DateTable[Date] ), MONTH ),
        DATEDIFF ( Final[Start Date], Final[Resignation date], MONTH )
    )
),
CROSSFILTER(Teqvim[Date], Final[Start Date], None)
)

 

 

If this answer solves your problem, please give it a thumbs up and mark it as an accepted solution so the others would find what they need easier.

Regards,
Loran

Helpful resources

Announcements
November Carousel

Fabric Community Update - November 2024

Find out what's new and trending in the Fabric Community.

Dec Fabric Community Survey

We want your feedback!

Your insights matter. That’s why we created a quick survey to learn about your experience finding answers to technical questions.

Nov PBI Update Carousel

Power BI Monthly Update - November 2024

Check out the November 2024 Power BI update to learn about new features.

Live Sessions with Fabric DB

Be one of the first to start using Fabric Databases

Starting December 3, join live sessions with database experts and the Fabric product team to learn just how easy it is to get started.