How to provide sample data in the Power BI Forum

ImkeF · ‎03-07-2020

If you want to have your question answered quickly and avoid many back and forth, you should read this excellent article with lots of useful tips. One of them is providing sample data. To describe your problem, it is often very helpful if you make a screenshot of your table(s) and paint or annotate the logic you want to achieve. A picture is the perfect medium for it and everyone is allowed to upload those. However, in addition to that, sometimes the problem can best be solved by playing with the data or some sample data (if the original data is confidential or too large). There are some things to consider for doing so:

1) Uploading files

Especially when you have a problem with a DAX statement or the data model, it would be best to provide a pbix-file containing the sample data. You might have seen posts here in the forum where files are directly attached and have searched for the button to do exatly that. But unless you're a Microsoft employee or a super user this feature will not be available for you. Instead you have to upload your file to a cloud storage (like OneDrive, Dropbox, Google Drive or Wetransfer for example) and paste the link to that storage location in the post.

2) Pasting tables into the post

Another way is to paste table(s) with the sample data directly into the post. If you do that, it's important that this results in proper HTML-tables because otherwise it will become difficult to copy that data into the tools to work upon. The following steps show how easy it is:

2a) Only take data that you've copied from a spreadsheet

Please don't copy the data directly from Power BI to the post. This will most likely mess up the headers and other elements as well.

Also, if your data comes from another webpage or wherever: Copy it first into a spreadsheet.

Select the data in the spreadsheet and copy it there.

2b) Use the "Table"-button to insert your data.

If you don't see that button, that means that the current web page is not fully rendered yet. Wait a bit for it to appear.

2c) Select just ONE field in the table

Table --> Table -> select just ONE (!) field (irrespective of the size of the copied data)

2d) Paste the copied table content

Place your mouse into the box:

paste with Ctrl + V (or Strg + V)

2e) Check the results

The header row should be identifiable as such:

But if your data looks like so, something went wrong:

This is probably due to some messed up HTML formatting. I would start a new thread to paste this data instead. Close the current thread and give a hint that further content is coming. Pasting into a fresh thread should be the quickest way going forward.

Please have in mind that you cannot post very large tables directly into the post, as the size is limited to 20.000 characters per post. (Counting the characters in the HTML-code).

Anything I've missed? Please let me know in the comments below.

Thanks and stay queryious 😉

Anonymous · ‎03-31-2022

Hey,

I am trying to substract the values based on one column to another column.

In the below table ID is having groups of Data,if the ID and the Cycle No is 1,and the faults are different the output should be 1.

If the Same ID and Cycle No are different faults are same then the output suould be substract with the same Cycle No (For Example ID:K09031 Cycle No:2 Fault: No then next Cycle No:6 same Fault: No then output should be 6-2=4 & ID:K09031 Cycle No:2 Fault: No then next Cycle No:8 same Fault: No then output should be 8-2=6)

If the Same ID and Cycle No are different faults are same then the output suould be substract with the same Cycle No (For Example ID:K11121 Cycle No:1 Fault: Damage then next Cycle No:3 same Fault: Damage then output should be 3-1=2 , ID:K11121 Cycle No:1 Fault: Damage then next Cycle No:5 same Fault: Damage then output should be 5-1=4, ID:K11121 Cycle No:1 Fault: Damage then next Cycle No:6 same Fault: Damage then output should be 6-1=5, ID:K11121 Cycle No:3 Fault: No then next Cycle No:6 same Fault: No then output should be 6-3=3 & ID:K11121 Cycle No:1 Fault: Edge then next Cycle No:6 same Fault: Edge then output should be 6-1=5)

Note: Here Id has indusival groups with cycle no's and different faults, that should substract with the same fault occurs in the same group with earlier cycle no has same fault occur.

An Example if my dataset is this with required Solution Column:

Id	Cycle No	Fault	Solution Column
KL0002	1	Edge	1
KL0002	1	Damage	1
K09031	2	Edge	2
K09031	2	No	2
K09031	6	No	4
K09031	8	With	8
K09031	8	No	6
K11121	1	Damage	1
K11121	1	Edge	1
K11121	3	No	3
K11121	3	Damage	2
K11121	5	Damage	4
K11121	6	With	6
K11121	6	Damage	5
K11121	6	No	3
K11121	6	Edge	5
KG1366	1	No	1
KG5560	1	With	1
H15238	5	Edge	5
H15678	1	No	1
HG1234	1	No	1
HG1234	1	Edge	1
H08542	2	With	2

Anyone with some ideas on how to fix this? Manually is not an option as there are thousands of datapoints.

Thanks & Regards,

Dharani

m_m_a · ‎04-25-2022

Hi guys, i need help for a situation. Before going to the problem, please understand the background.

Here is the data of students in Table 1 who have discontinued their study from university. I want to know in which semester student disconnected their study. I have dates when they leave but issue is this data for different batches. So for example, if a student admit in fall 16 and discontinued in Feb 2019 then he left the university in 6th semester but if a student is admit in fall 21 and discontinued in Sep 2021, it will count 1st semester. I need an automatic process because this data is coming live from a system.

Anonymous · ‎03-22-2023

Holdinga report.jpg

Hi everyone,

i have a table the table name is holdings with five coulums i want to group by the columns ( product name, investor name, currency). Here I need to get the month-end values from the "Holding Amount column, and I also same as month end dates in the Date column. Could you please have anyone help me?

Shady · ‎04-10-2023

Hi
i have question in power Bi, im working on hour compansation report, and there's agent already owe to the company hours and other are not, howvere they already working an extra hours, i need a fourmal in power Bi( Dax) or whatever its called to get the hours needs to be compansate for those who owe hours only not the rest of users, i tried IF Dax, however its not leading me to anything , heres below screenshot from the data

Juned · ‎09-01-2023

Hello, I am working with a small data set in power Bi where I have one date table as shown above. Since my Auto Intellegence is turned on, I am getting a hierarchy here that is awesome. This hierarchy includes year, quarter and month.

Now I want to make a comparison any two years, or quarters, or months based on the dataset. That is why I created a comparison table, and I made the connection inactive. Then I used the DAX formula using All (to remove all filters from my main date table) and Userelationship between the comparison table and main date table. Then I calculated the sum of revenue for comparison. Everything is working fine, however when I was just comparing the revenue, I selected a slicer for my main date table, and another slicer for my comparison date table so that I can pick two different dates from these tables to compare. However, I am finding the following result :

I realized that when I just connect these two tables (Table1, and Comparison Calender), Immediately the hierarchy switched from Table1 to Com. Calender. Why is it switching? my comparison table now has the hierarchy (Year, Month, Quarter), but No hierarchy for my main date table named as (Table1). In the begining, main date table has the hierarchy, but now it has switched, Why? please help me out

Regina11 · ‎11-30-2023

Hey everyone!
I am experiencing issues using Power BI to create a map with multiple layers (state and county). It seems that when I click on a state bubble to explore the counties, bubbles outside the intended state appear, and there are inconsistencies in the location of the bubbles in the legend. When I hover over the bubble outside the correct state, the respective legend correctly states the correct state; however, the bubble is located in another state. I have already checked my database, and there are some data entries where there is no county (N/A), but there is a state. Even so, the bubble appears outside the state when drilling down into the county.

Please help!!! How can I fix this?

Alusine_Kamara · ‎12-06-2023

Hello everyone, I am trying my understanding of how to paste a table into the comment portion. I decided to add a question along side this test.
Below is a portion of a GDP dataset for several countries over a period of time, from 1960 to 2017. There are some missing GDP values for some countries at some given years. Loaded into the Power BI query editor, the missing values were represented as "null" values. How do I deal with these "null" values in the query editor, before I Close and Apply into the Report Editor? Thank you in advance.

Country Name

Country Code

Indicator Name

Indicator Code

1960

1961

1962

1963

1964

1965

1966

1967

1968

1969

1970

1971

1972

Aruba

ABW

GDP (current US$)

NY.GDP.MKTP.CD

Afghanistan

AFG

GDP (current US$)

NY.GDP.MKTP.CD

5.38E+08

5.49E+08

5.47E+08

7.51E+08

8E+08

1.01E+09

1.4E+09

1.67E+09

1.37E+09

1.41E+09

1.75E+09

1.83E+09

1.6E+09

Angola

AGO

GDP (current US$)

NY.GDP.MKTP.CD

Albania

ALB

GDP (current US$)

NY.GDP.MKTP.CD

Andorra

AND

GDP (current US$)

NY.GDP.MKTP.CD

78619206

89409820

1.13E+08

United Arab Emirates

ARE

GDP (current US$)

NY.GDP.MKTP.CD

Argentina

ARG

GDP (current US$)

NY.GDP.MKTP.CD

2.45E+10

1.83E+10

2.56E+10

2.83E+10

2.86E+10

2.43E+10

2.64E+10

3.13E+10

3.16E+10

3.33E+10

3.47E+10

Armenia

ARM

GDP (current US$)

NY.GDP.MKTP.CD

American Samoa

ASM

GDP (current US$)

NY.GDP.MKTP.CD

Antigua and Barbuda

ATG

GDP (current US$)

NY.GDP.MKTP.CD

Australia

AUS

GDP (current US$)

NY.GDP.MKTP.CD

1.86E+10

1.96E+10

1.99E+10

2.15E+10

2.38E+10

2.59E+10

2.73E+10

3.04E+10

3.27E+10

3.66E+10

4.13E+10

4.51E+10

5.2E+10

Austria

AUT

GDP (current US$)

NY.GDP.MKTP.CD

6.59E+09

7.31E+09

7.76E+09

8.37E+09

9.17E+09

9.99E+09

1.09E+10

1.16E+10

1.24E+10

1.36E+10

1.54E+10

1.79E+10

2.21E+10

Azerbaijan

AZE

GDP (current US$)

NY.GDP.MKTP.CD

Burundi

BDI

GDP (current US$)

NY.GDP.MKTP.CD

1.96E+08

2.03E+08

2.14E+08

2.33E+08

2.61E+08

1.59E+08

1.65E+08

1.78E+08

1.83E+08

1.9E+08

2.43E+08

2.53E+08

2.47E+08

Belgium

BEL

GDP (current US$)

NY.GDP.MKTP.CD

1.17E+10

1.24E+10

1.33E+10

1.43E+10

1.6E+10

1.74E+10

1.87E+10

2E+10

2.14E+10

2.37E+10

2.68E+10

3E+10

3.74E+10

Benin

BEN

GDP (current US$)

NY.GDP.MKTP.CD

2.26E+08

2.36E+08

2.54E+08

2.7E+08

2.9E+08

3.03E+08

3.06E+08

3.26E+08

3.31E+08

3.34E+08

3.35E+08

4.1E+08

Manigandan · ‎03-28-2024

Thanks you for reply

Table 1 REV

Stn	TokenRider	Card Rider	Total Rider	Revenue	SJT ISS	SJT REF	RJT ISS	RJT REF	FET ISS	FET REF	PET ISS	PET REF	SVP REL	SVP ISS	SVP REF	TRP REL	TRP ISS	TRP REF	Corrected	RunDate	P Group
VER	413	24	437	11725	385	0	14	0	0	0	0	0	0	0	0	0	0	0	436	25-Mar-24	MQR
VER	2990	0	2990	86230	2707	3	143	0	0	0	0	0	0	0	0	0	0	0	3138	25-Mar-24	PQR
VER	0	668	668	13890	0	0	0	0	0	0	0	0	1	0	26	0	3	7	673	25-Mar-24	CLP
VER	0	62	62	1470	0	0	0	0	0	0	0	0	0	0	0	0	0	0	62	25-Mar-24	NCMC

Table 2 TR

STN	SJT	RJT	45T	ULT	SVP	TOK	PAS	TOT	Group	Date
VER	364	45	5	0	19	409	24	433	MQR	25-Mar-24
VER	0	0	1	488	179	0	668	668	CLP	25-Mar-24
VER	0	0	0	0	62	0	62	62	NCMC	25-Mar-24
VER	2656	458	0	0	0	3114	0	3114	PQR	25-Mar-24

Manigandan · ‎03-29-2024

2nd Table

aatish178 · ‎05-31-2024

But I wasn't able to see attachment option to attach my sample data files

Elyblog2009 · ‎07-07-2024

Hello!

Can someone help me on the below topic?

I am trying to mach the values in a new column in the Main "Customer Profile" table "Product" column to match the VFAL_ product_ list table that have 2 columns "Product" and "product family name" and populate the column with the product family name in the Customer Profile.

Maybe it is also a relationship issue?

Thank you!

Adaonwa · ‎08-13-2024

Hi,I have a table with forecast values and actuals. The actuals are pulling through correctly, but the forecast values are only showing staff costs and overheads, leaving out all other expense types. I've checked, and there doesn't seem to be a filter applied anywhere.Is anyone able to advise?

MahimaHulale · ‎09-18-2024

Hi I want to generate a series of week wise aging I am providing a dummy data .
Created date Resolved Date Days Aging

03-01-24 13:27	23-04-24 11:45	110
05-01-24 3:29	07-04-24 13:05	93
08-01-24 12:34	07-04-24 13:05	90
08-01-24 13:22		254
08-01-24 16:49	11-06-24 13:51	154
08-01-24 17:08	24-05-24 19:30	137
11-01-24 15:03	16-05-24 15:48	126
15-01-24 13:15	03-09-24 12:21	231
17-01-24 16:01	06-04-24 23:26	80
23-01-24 12:10	15-02-24 11:50	22

So I want a distribution on weekly basis for eg. lets take 3 jan 2024 the ticket has been created and resolved in april so until it get resolved it should be adding weeks on week until it gets resolved .I have researched about it a lot I am not able to find the correct formula.Kindly help would love to hear from you.

MahimaHulale · ‎09-18-2024

Hi I want to generate a series of week wise aging I am providing a dummy data.

So I want a distribution on weekly basis for eg. lets take 3 jan 2024 the ticket has been created and resolved in april so until it get resolved it should be adding weeks on week until it gets resolved .I have researched about it a lot I am not able to find the correct formula.Kindly help would love to hear from you.