Forum Discussion
Issue with Dataflow Incremental Refresh
Hi All,
We are using Gen1 Dataflows for our project and recently we got to see some abnormality. A dataflow has 5 tables and 3 tables are configured with incremental refresh. Full Refresh has been completed and incremental was running from past 2 days. But today we have seen that Dataflow refresh has failed due to server issue. when we trigger the next refresh, we see that out of 3 tables which has to go for incremental refresh , 2 tables has gone for full refresh and displayed all partitions and one table performed incremental refresh asusual.
I am not sure what would be the reason for this. Any help would be appreciated
Thanks,
6 Replies
I suggest you do the following to diagnose and fix the issue:
- Check the dataflow refresh history for partition resets.
- Verify date/time columns for schema or type changes.
- Confirm query folding is active in Power Query.
- Review source system logs for disruptions.
Then, run a full refresh manually to reset partitions. Let me know what you find.
Did it work? 👍 A kudos would be appreciated
🟨 Mark it as a solution to help spread knowledge 💡Hi vamshikrishna20,
Have you reviewed the steps provided by DataVitalizer and either resolved your issue or encountered any errors related to it?
Thank you.
Hi vamshikrishna20,
Checking in to see if your issue has been resolved. let us know if you still need any assistance.
Thank you.
Hi vamshikrishna20,
We haven’t heard back from you in a while regarding your issue. let us know if your issue has been resolved or if you still require support.
Thank you.
Hi v-saisrao-msft - There's no resolution as of now. We are still working with micrososft support on this
Hi vamshikrishna20,
Could you let me know if the issue has been resolved? If so, please share the insights about the issue, as this could be helpful for other community members.
Thank you.
