There should be the possibility to use Swiss number formatting in Fabric with Semantic Models in Direct Lake ... View more

Until yesterday, the Data Agent Test pane had an inline “Details” section that exposed the generated SQL for Warehouse/Lakehouse steps. Now the only path is “Download diagnostics,” which produces a JSON I have to open and parse to find the SQL it generated for my test promt. That adds multiple clicks and context-switches per prompt and has greatly slowed down development.    Impact: - Slows the tight dev loop (prompt → inspect SQL → adjust → re-test) because have to find SQL in diagnostic file instead of directly below my prompt/answer in the test pane - Makes authoring and curating example queries more cumbersome. - Discourages rapid experimentation when training the Data Agent on domain data. - Increases overhead during multi-step plans, where I need to see the SQL per step quickly.   Basically, when we're not getting the data we're expecting, I was previously able to easily identify the issue by quickly inpecting the SQL and then adding updated example queries to the data source examples section. This would fix the issue and was fast. Removing the generated SQL in the test pane has now slowed down development significantly.   Request: 1) Restore the inline Details / “Show SQL” panel in the Test pane for Warehouse/Lakehouse SQL endpoint calls. 2) Alternatively, add a “Developer mode” toggle that shows tool calls (with generated SQL) inline—no download required.   ... View more

Hello, On the NPM package powerbi-client@2.23.9 I see some Architecture Quality Policy warnings on the following.  Age older than 1825 days because: Found component older than 5 years, see bold arced dependencies:   powerbi-client@2.23.9      http-post-message@0.2.3 powerbi-client@2.23.9      powerbi-router@0.1.5               route-recognizer@0.1.11 powerbi-client@2.23.9       http-post-message@0.2.3            es6-promise@3.3.1       powerbi-router@0.1.5            es6-promise@3.3.1 deduped       window-post-message-proxy@0.2.9            es6-promise@3.3.1 deduped powerbi-client@2.23.9       powerbi-router@0.1.5   ... View more

The Lineage View is currently not very useful (apart from a large number of items that are created by connections, etc.), because I call up or reference tables from other lakehouses/warehouses in views/stored procedures, but these are not then displayed in the Lineage View. The warehousen still stands alone. Access to other artifacts should also be displayed via SPs. ... View more

Is there a way to generate an email send in a pipeline to a corporate account and attach a CSV file? What alternatives do I have to send a CSV that is in a lakehouse by email? Thank you very much! ... View more

Hello,   Currently, Microsoft Fabric does not provide a way to temporarily pause data syncing for Mirrored Databases while keeping the mirror relationship intact. The only available option is to delete the mirror, which removes all metadata and requires a full re-ingestion if the mirror needs to be re-established later.   A Pause / Resume capability would provide significant benefits:   Key Benefits   Cost Control: Allows organizations to temporarily halt ingestion during periods of low usage or while performing maintenance. Operational Flexibility: Pausing sync prevents unnecessary data transfers when source systems are under heavy load. Data Quality & Governance: Enables teams to stop ingestion while upstream data issues are being corrected without losing the mirror configuration. No Loss of Configuration: Keeps the mirror relationship, schema mapping, and settings intact, avoiding the need to recreate the mirror.   Requested Features:   A Pause button that stops all incremental sync operations without deleting the mirror. A Resume option that continues syncing from the last successful checkpoint. Optional schedule-based pausing (e.g., pause nightly or weekends). Clear UI indicators of paused status and last sync time. This enhancement would bring Mirroring more in line with other Fabric ingestion patterns that already support manual or scheduled refresh control. Thank you for considering this feature. ... View more

Now onedrive/sharepoint refresh, identify the pbix file by File ID instead of File Name. It really causes a lot of issues. When people incorrectly update the file, the file ID lost quietly and intentionally!!! Then all the connection of the reports have to redo...that's really rediculous! This solution is more of a non-technical or user-friendly way, but using a invisible identifier - file ID to identify the file. In the Onedrive/sharepoint, of course file names are not able to duplicate, so naturally it should and it's also available to identify by file name.   Besides, the break of the connection can't be found until developer realise the new function doesn't work, because the model is still able to update data.     ... View more

For the Azure Maps Visual in PowerBI - can we have it default to the Satellite overlay rather than Grayscale. Every time I switch to Satellite view and publish - it reverts back to Grayscale. Grayscale is nice but prefer Satellite.    Here's what other forusm have told me:  Short answer: No — not currently. Power BI’s Azure Maps visual does not allow you to set “Satellite” (or any basemap) as the permanent default. It always reloads using the default Road/Grayscale basemap when the report renders. However… there are a few workarounds depending on how you’re publishing the report. Current State (Limitations) Microsoft's Azure Maps visual has: No property in Visual Settings No Format → Map settings option No JSON theme capability No report-level or visual-level configuration that locks the basemap to Satellite This is why your report keeps snapping back to Grayscale even though you pick Satellite manually. This is expected behavior (unfortunately) and affects: Power BI Desktop Power BI Service Power BI embedded ... View more

It would be helpful to be able to chose which side the column subtotals (or totals) show on the matrix table so that you can always see them as you scroll have to scroll horizontally through the column fields. Or have them be similar to when you have row totals and have to scroll virtically, the row totals are always visible. I have tables where the grand total per row (column totals) is the primary data point they want to see but they still want to be able to scroll the the fiscal years (column variables).  ... View more

Hi,   The current limitation for applying (or removing) tags is 25 calls per hour. That's not enough! Please increase this limitation to 200 at least!   Thx ... View more

Hi,   Is it possible to have an end point to remove on a specific item/workspace all tags in one call? That helps a lot!   Thx ... View more

Suppose in the image the given table is what im showing as table and below that i had explained how i did putted eveyrthing to make that matric visual in power Bi, now the question is, as by defualt power bi give to sort the rows like i can sort the teacher by theri name , can sort by its class on just by click onto their header.... so like wise row works. i want those value to be work, as jan-25 should also have the sort button which sorting whole value in that metrix . like the same kind of sort for each jan -25, feb-25 etc ... View more

Hi, I would like to know if there is any way to schedule the refresh times of a dataflow differently depending on if it's a weekday or weekend.  Thanks ... View more

My RMAS Daily pulse almost never comes on time and it effects our ability to set rates daily. It is supposed to come at 10:30 AM EST and we have regularly gotten them at 2PM or even 5PM. I have brought this up with my Marriott point of contact and he ignored my emails  ... View more

Hello,   Currently, when I scheduled refresh in Power BI Service always performs a full refresh, including both data updates and any schema changes. I would like to suggest an enhancement that gives users the option to:   Refresh only the data (ideal for frequent updates and optimising resource usage). Perform a full model refresh when structural changes are required. Additionally, there could be a manual option such as “Refresh everything on the next run” for occasional scenarios where a complete update is necessary. This functionality would provide greater control and efficiency, particularly for large models and high-frequency refresh environments.   I have not found this functionality documented or available in the current service. If it already exists, I would appreciate guidance. Otherwise, I believe this improvement would be highly valuable for many organisations managing complex models.   If you believe this feature would be useful, please support this idea by voting so that it can be considered by the Power BI team. ... View more

Just like on the new cards, gauges should have a custom field to define what should be shown if the source happens to be null. Currently it shows (blank) and coalesce(value, 0) may not always be reasonable to use therefore the only reliable fallback is fx and set to bg-color when blank. But this is ugly. I'd hope to have a small update added where (blank) is -- by default on the gauge but also customisable jsut like on the new cards.   Thanks! ... View more

Not sure about you guys but there's been many times where I just see the dot next to my pipeline's name and I go into the state where I'm unsure if I made any changes or if I really did, where did I do them, after making the changes, went to get coffee and came back clueless. In this scenario, it would be largely helpful if copilot could see where the last saved state and give me an update on changes I have made and aren't saved yet. Currently, based on my interactions with Copilot, it seems that it can only interact with the last saved state of the pipeline and asking it "what's are the changes made" sometimes just drives Copilot crazy and it makes some changes to the pipeline instead of answering the question. Tip: as of now, start your prompts with "without modifying the pipeline, what is..." if you just want to ask Copilot questions about the pipeline and not do work on it just yet. ... View more

Enable Power BI Desktop to create reports, visuals, and dashboards directly on top of Semantic Models in DirectLake mode. Today, Power BI Desktop cannot build or edit reports when the model is in DirectLake. This feature would allow developers to design, visualize, debug, and build dashboards locally using the full performance of DirectLake, instead of being restricted to the Fabric service. ... View more

If a semantic model in Power BI Service has been configured by another user then a number of settings (e.g., Parameters, Refresh) are not accessible for even read-only viewing. I oftentimes want to check the Parameters values of a model but can only do so if I 'Take over' the configuration, which is not a good approach. Ideally, I would be able to at least view the settings values of a semantic model that has been configured by another user.   ... View more