Skip to main content
cancel
Showing results for 
Search instead for 
Did you mean: 

Find everything you need to get certified on Fabric—skills challenges, live sessions, exam prep, role guidance, and more. Get started

Reply
eugenm
Helper II
Helper II

Synchronize chart hierarchy level selector with separate slicer

Hi folks,

 

Can someone please advise how I can synchronize the chart hierarchy selection with a separate slicer?

At this point I have a selector that controls a different aspect of the chart (separate code for the values calculation) and the output must be in sync with the hierachy level. Without this functionality a user has to make appropriate selections in both the chart visual heireachy and in the selector. This is a clumsy ux, to say the least.

 

I trust that this can be done, but I could not find any proper reference to it anywhere.
I would prefer that my slicer controls the visual hierarcy in the chart, but I would be OK with the visual passing the selected visual level, which then I can use it as a slicer value for my code snippets.

 

Thank you in advance,

Eugen

2 ACCEPTED SOLUTIONS
jdbuchanan71
Super User
Super User

@eugenm 

Is your Size slicer populated from a small table with just 'Daily', 'Weekly', 'Monthly' in it?  If so you might be able to make a bands table that would look something like this.

Size Band
Daily 0-15
Daily 15-30
Daily 30-45
Daily 45-60
Daily 60-75
Weekly 0-50
Weekly 50-100
Weekly 100-150
Weekly 150-200
Weekly 200-250
Monthly 0-500
Monthly 500-1000
Monthly 1000-1500
Monthly 1500-2000
Monthly 2000-2500

Then you put the Band from this table in your chart and link it into your model.  You could also just use the band from the table above in your slicer and switch your calc based on the selection made, something like this.

Display Amount =
VAR _Size =
    SELECTEDVALUE ( 'Bands'[Size] )
RETURN
    SWITCH (
        _Size,
        "Daily", [Daily Measure],
        "Weekly", [Weekly Measure],
        "Monthly", [Montly Measure]
    )

 

View solution in original post

parry2k
Super User
Super User

@eugenm yes you can, you can use ISINSCOPE function.



Subscribe to the @PowerBIHowTo YT channel for an upcoming video on List and Record functions in Power Query!!

Learn Power BI and Fabric - subscribe to our YT channel - Click here: @PowerBIHowTo

If my solution proved useful, I'd be delighted to receive Kudos. When you put effort into asking a question, it's equally thoughtful to acknowledge and give Kudos to the individual who helped you solve the problem. It's a small gesture that shows appreciation and encouragement! ❤


Did I answer your question? Mark my post as a solution. Proud to be a Super User! Appreciate your Kudos 🙂
Feel free to email me with any of your BI needs.

View solution in original post

11 REPLIES 11
parry2k
Super User
Super User

@eugenm yes you can, you can use ISINSCOPE function.



Subscribe to the @PowerBIHowTo YT channel for an upcoming video on List and Record functions in Power Query!!

Learn Power BI and Fabric - subscribe to our YT channel - Click here: @PowerBIHowTo

If my solution proved useful, I'd be delighted to receive Kudos. When you put effort into asking a question, it's equally thoughtful to acknowledge and give Kudos to the individual who helped you solve the problem. It's a small gesture that shows appreciation and encouragement! ❤


Did I answer your question? Mark my post as a solution. Proud to be a Super User! Appreciate your Kudos 🙂
Feel free to email me with any of your BI needs.

EUREKA!
ISINSCOPE worked. I've ended up consolidating the Banding Tables into one and created a hierachical Month > Week > Day structure that I then used in a modified switch measure. It works perfectly. 
I now deleted my separate band tables and the band slicer - clean and it's working.

Quite a shame that I can't do it via a slicer as I find the hierachical switched at the top of the chart very non user friendly. Not perfect, but perfectly functional.
Thank you again, Parry!

jdbuchanan71
Super User
Super User

@eugenm 

Is your Size slicer populated from a small table with just 'Daily', 'Weekly', 'Monthly' in it?  If so you might be able to make a bands table that would look something like this.

Size Band
Daily 0-15
Daily 15-30
Daily 30-45
Daily 45-60
Daily 60-75
Weekly 0-50
Weekly 50-100
Weekly 100-150
Weekly 150-200
Weekly 200-250
Monthly 0-500
Monthly 500-1000
Monthly 1000-1500
Monthly 1500-2000
Monthly 2000-2500

Then you put the Band from this table in your chart and link it into your model.  You could also just use the band from the table above in your slicer and switch your calc based on the selection made, something like this.

Display Amount =
VAR _Size =
    SELECTEDVALUE ( 'Bands'[Size] )
RETURN
    SWITCH (
        _Size,
        "Daily", [Daily Measure],
        "Weekly", [Weekly Measure],
        "Monthly", [Montly Measure]
    )

 

Accepting this as a solution as well, because the switch that I already had was using such structure.
The banding table had to be different, as the value ranges overlapped.
But using the ISINSCOPE and THIS guide it all worked out well. Done and done! Thanks

The 3 tables are actually banding tables with the additional ranges defined. The ranges are overlapping, which is why I have them separated. See HERE. So, I'm not sure the proposed solution would work. Is there any way to tweak it? I like your idea.

You should be able to do something like this where the index is adjusted so the sort order works but is still unique.  Then your banding calcs would just have to also look at the size column and not just the min and max.

Size Band Min Max Index
Daily No Data -1 0 1
Daily 0-15 0 15 2
Daily 15-30 15 30 3
Daily 30-45 30 45 4
Daily 45-60 45 60 5
Daily 60-75 60 75 6
Daily 75-90 75 90 7
Daily 90-105 90 105 8
Daily 105-120 105 120 9
Daily 120-135 120 135 10
Daily 135-150 135 150 11
Daily >150 150 1000 12
Weekly No Data -1 0 1
Weekly 0-70 0 70 102
Weekly 70-140 70 140 103
Weekly 140-210 140 210 104
Weekly 210-280 210 280 105
Weekly 280-350 280 350 106
Weekly 350-420 350 420 107
Weekly 420-490 420 490 108
Weekly 490-560 490 560 109
Weekly 560-630 560 630 110
Weekly 630-700 630 700 111
Weekly >700 700 70000 112
Monthly No Data -1 0 1
Monthly 0-0.3 0 300 1002
Monthly 0.3-0.6 300 600 1003
Monthly 0.6-0.9 600 900 1004
Monthly 0.9-1.2 900 1200 1005
Monthly 1.2-1.5 1200 1500 1006
Monthly 1.5-1.8 1500 1800 1007
Monthly 1.8-2.1 1800 2100 1008
Monthly 2.1-2.4 2100 2400 1009
Monthly 2.4-2.7 2400 2700 1010
Monthly 2.7-3 2700 3000 1011
Monthly >3 3000 10000000 1012

 

I basically had to create set by having 3 sets of columns for Daily, Weekly and Monthly (Band_Day, Min_Day, Max_Day and same for weekly/monthly). Just in case someone will find this useful. 
Cheers

parry2k
Super User
Super User

@eugenm I don't think it is possible but there are workarounds for dynamic x-axis which can change based on your selection. You can also look at my post on mixing granularities and tweak it as per your need but there is no way to auto drill up/down based on the selection.

 

Check my latest blog post Improve UX: Show Year in Legend When Using Time Intelligence Measures | PeryTUS IT Solutions  I would ❤ Kudos if my solution helped. 👉 If you can spend time posting the question, you can also make efforts to give Kudos to whoever helped to solve your problem. It is a token of appreciation!

Visit us at https://perytus.com, your one-stop-shop for Power BI-related projects/training/consultancy.

 



Subscribe to the @PowerBIHowTo YT channel for an upcoming video on List and Record functions in Power Query!!

Learn Power BI and Fabric - subscribe to our YT channel - Click here: @PowerBIHowTo

If my solution proved useful, I'd be delighted to receive Kudos. When you put effort into asking a question, it's equally thoughtful to acknowledge and give Kudos to the individual who helped you solve the problem. It's a small gesture that shows appreciation and encouragement! ❤


Did I answer your question? Mark my post as a solution. Proud to be a Super User! Appreciate your Kudos 🙂
Feel free to email me with any of your BI needs.

I certainly look at your blog post, thanks.

If using the filter to control the hierarchy display level in the chart is not an option, is there any option to pass the hierarchy level from the chart - same as you would from a slicer? 

parry2k
Super User
Super User

@eugenm not sure I followed your question, can you share some screenshots and explain?



Subscribe to the @PowerBIHowTo YT channel for an upcoming video on List and Record functions in Power Query!!

Learn Power BI and Fabric - subscribe to our YT channel - Click here: @PowerBIHowTo

If my solution proved useful, I'd be delighted to receive Kudos. When you put effort into asking a question, it's equally thoughtful to acknowledge and give Kudos to the individual who helped you solve the problem. It's a small gesture that shows appreciation and encouragement! ❤


Did I answer your question? Mark my post as a solution. Proud to be a Super User! Appreciate your Kudos 🙂
Feel free to email me with any of your BI needs.

Hi Perry, 

 

Please see the details HERE 

I basically have 3 levels of banding with a slicer that dictates which banding calculation is used (band size calculation). I would like for it to also switch the chart's hierachical level to the respective bands, which selects the bands displayed. Without such sync I get no data or weird out of sync charts.

Helpful resources

Announcements
Sept PBI Carousel

Power BI Monthly Update - September 2024

Check out the September 2024 Power BI update to learn about new features.

September Hackathon Carousel

Microsoft Fabric & AI Learning Hackathon

Learn from experts, get hands-on experience, and win awesome prizes.

Sept NL Carousel

Fabric Community Update - September 2024

Find out what's new and trending in the Fabric Community.