Skip to main content
cancel
Showing results for 
Search instead for 
Did you mean: 

Find everything you need to get certified on Fabric—skills challenges, live sessions, exam prep, role guidance, and more. Get started

Reply
RosieL
Power BI Team
Power BI Team

Share your thoughts on the new On-Object Interaction feature (preview)

Hit Reply to tell us what you think about the new On-Object Interaction feature so we can continue to improve.

For example:

  • What changes would you like to see?
  • If you turned off the preview switch, why?
  • Any suggestions for addititional settings or capabilities?

Thanks,

-Power BI team

 

To read more about the feature, see the announcement in the Power BI Product Blog or our documentation on how to Use on-object interaction


FAQs:

  • Q: How can I open multiple panes at once?
    • A: You can CTRL + click or right click on the unselected pane you wish to open and choose "Open in new pane"
  • Q: Where did aggregations move to?
    • A: It's still on right click of a field, or you can use the new flyout aggregations dropdown while choosing or swapping a field.
  • Q: Where did drillthrough and tooltip page setup move to?
    • A: Drillthrough is now in the page settings of the format pane under Page Information > Page type > Drillthrough or Tooltip.
847 REPLIES 847

I appreciate the thoughtful comment, but just to clarify (or expand slightly) the underlying point in my post within the context you present: I understand the adjustment, but having to adjust 'for the sake of it' when there is no benefit to the end user is unproductive. And while I do agree that on a smaller screen there is absolutely a benefit to this behaviour (of the right-hand panes), for many experienced users on a larger screen (including myself) this is simply a slower interaction regardless of said 'adjustment'.

Also, just to give a wider (and somewhat relevant) context, I have 'adjusted' to similar interface changes in Microsoft Excel, but as a result, many tasks are provably slower now versus previous UX/UI options. Fortunately Excel is not my main go-to software (PBI currently is), but as I have access to both the latest version and a (much) older copy, I can quickly prove out this 'theory' in real time. For certain (admittedly specific) editing tasks, the old UX/UI in Excel was faster than the new one, and myself and others are understandbly concerned about the same happening to PBI, though in a more severe way.

So yes, one can 'adjust' to anything over time, theoretically, however that doesn't mean such change is beneficial or meaningful.

I agree the current options have real benefit for some users, especially on smaller screens, that's never been in question. The only request from the 'rest of us' is to also have the option of maintaining the status quo for the right-hand pane behaviour where we see real benefit in the current UX/UI.

But we're in full agreement it's a good improvement all the same, the previously dissapearing icons you mention in particular were illogical.

Rudz
Kudo Collector
Kudo Collector

Totally agree. But here's the bigger issue in my mind. Too much development time is getting sucked into a hole for something that is just pissing off the majority of the Power BI community. Remember when you used to look forward to new releases because Microsoft would provide new features that made Power BI better? Remember when they had a roadmap with exciting features coming? Remember when we were eagerly awaiting the new visuals, like the "New Card"? Sigh. On-object first came out in March and we still don't have collapsable panes done right. Come on Microsoft. You have to be better than this.

GaryC
Kudo Commander
Kudo Commander

Well said.

andrewpirie
Resolver II
Resolver II

Hey @RosieL I've noticed several times both at work and home (one large monitor, one laptop), when I am editing a visual that is using the entire canvas width, the on-object interaction build and formatting menus go off screen.

 

I can collapse menus so they show back overtop of the visual on the canvas, but it's a disruption to flow when I go looking for them and they're not visible. I suspect the on-object menu is positioned to the right of the visual, which happens to be off-screen behind the expanded panes.

 

tablevisual_ooi.gif

 

Also, I like I can see and edit the column list for the visual close on the screen to where I'm working through the on-object interaction menu.

Hey @RosieL, the on-object interaction menu seems to have problems appearing when used alongside a Report Page tooltip on my setup. If the report page tooltip displays, the on-object interaction buttons seem follow the report page tooltip, and when the tooltip disappears, the buttons disappear until the visual is moved. It does seem to be related to the tooltip appearing - if I switch between data and report view and between pages, but avoid hovering so the tooltip doesn't display, all is well.

 

Here's an example using the November 2023 release. After the tooltip appears, the on-object interaction buttons stop appearing and do not show when deselecting and reselecting the visual until the visual is moved. The not appearing buttons issue also affects the visual with no report page tooltip while it is occurring. Apologies if this issue is already reported.

On-Object with Report Page Tooltip.gif

 

 

Thanks for reporting Andrew! Definitely unexpected behavior, we'll take a closer look.

GaryC
Kudo Commander
Kudo Commander

Good news. Maybe you've already see the December 23 update preview that shows MS allowing options for how the on-object interactions are setup for you. While not perfect, it is better than being forced into the new format right away... https://www.youtube.com/watch?v=PycL2_T0DxM 

JuanMCasteig
New Member

I tried, but for someone use powerbi from the begining is lowest. i need make a more clicks and the typical problem of click area.  
I suggest make it optional and not a reemplace of the nomal UX of powerbi. 

pschwem
Regular Visitor

I am unable to locate Drillthrough or Tooltip or "keep all filters" anywhere. Can  you please provide updates and screenshots on how to find this information? 

DebbieE
Community Champion
Community Champion

i have tried multiple times with it and I really dont like it. Its like starting again with something more difficult to use. How do you turn it off. I go to your Sparkline page to make a sparkline (I have done this before) and the only informaiton is on the old way of working. 

 

I have sat here for half an hour trying to figure it it. So annoying. 

Hi DebbieE,

Yes agreed, I too haven't been able to keep it on for very long for similar reasons, too inefficient basically.
To your question though, just go to the usual 'Preview' section in your options, deselect it there, confirm your selection then restart PBI, which should see the 'old/current' UI back in place.

D_M_0-1701949608481.png

 



tanat_inc
Helper II
Helper II

I say No. The original approach is more convenient and can get the job done with fewer clicks.

Sorry but this not have UX !!! Please. Not GO !!!

I wonder how many times we have to repeat the complaints of inefficencies and requiring more effort to do the same work? These comments have been coming in for a year now, but MS persists in going down this design road.

YanySASiek
Advocate I
Advocate I

Thank you for taking feedback from the community on the On-Object Interaction Feature; love the willingness to always improve 🙂.

 

The recent updates to the feature, particularly in the November 2023 version, have definitely improved the tool. However, I have decided to continue to turn it off because it is not as intuitive as working without it.

 

More specifically, my main reason for not using the feature is that it requires more effort to create a visual than not using it. One of the recent updates allowed the fields pane to be expanded so that all text for fields/measures could be viewed. However, when trying to add data to the visual, the second pane cannot be expanded. This is very limiting and it would be great to add the expansion feature to this level (See red highlight in image below showing where the user cannot expand the pane)

 

YanySASiek_0-1701520173584.png

Yany

Severofm
Kudo Kingpin
Kudo Kingpin

I've always really appreciated the new BI updates, I've been using Power BI since 2008 and for me a big difference are the monthly updates, but the "On-object interaction feature" was the worst experience and disappointment I've had, and they are already months and months of failed attempts at updates that simply don't make the experience better compared to the current one, so I always return to the default by turning off the feature. There is no way to be productive using this preview.

cassidy
Power Participant
Power Participant

I gave it a few months of updates and tried it for 2 days after the Nov update.  Turned it off again out of frustration.  It's breaking my workflow and slowing down development considerably.  I realize all I'm trying to accomplish is get the settings set up to try and emulate the current functionality.

iBusinessBI
Kudo Collector
Kudo Collector

Very sad...

Each month I try to use it and every time have to turn this off.

It's like as if who develops it doesn't use it at all. Otherwise they would experience all kinds of problems:

* "build visual pane suddenly collapses when clicking on an object other that visual and it takes extra click to get it open again

* "Build a visual" and "format" are two separate panes (instead of one) that take screen space so the report is smaller.

Turn off again

Similar results with me. While I'm forcing myself to use the new interface, I experience random issues, including pinned panes closing. When I'm in a crunch to get work done, I revert to the old interface to avoid confusion, aggravation, and impediments to progress.

jusTodd
Advocate IV
Advocate IV

Hard to turn it off again.  This is just too awkward and as noted in a few of the replies to related post Re: Share your thoughts on the new On-Object Inter... - Page 2 - Microsoft Fabric Community .... completely random functionality is missing.

AshleyJ17
Frequent Visitor

 Hi There, apologies if this has been shared already, when using the on-object interaction i couldnt seem to change my values on a matrix visual to % of Column Total, usually under the Show Value As option this was there, but it wasnt showing any show value as options for me (or similar) while using this preview feature. Once i turned this feature off i could access these options again using the same columns in my data

Helpful resources

Announcements
Fabcon_Europe_Social_Bogo

Europe’s largest Microsoft Fabric Community Conference

Join the community in Stockholm for expert Microsoft Fabric learning including a very exciting keynote from Arun Ulag, Corporate Vice President, Azure Data.

Power BI Carousel June 2024

Power BI Monthly Update - June 2024

Check out the June 2024 Power BI update to learn about new features.

RTI Forums Carousel3

New forum boards available in Real-Time Intelligence.

Ask questions in Eventhouse and KQL, Eventstream, and Reflex.