Forum Discussion

jsteffe's avatar
jsteffe
Helper III
4 years ago
Solved

Problem with a date filter

Hello,

I produced this page in Power BI :

 

When I change the dates : my table refreshs correctly.
But if I change the formula of my measure "Statut" and I replace BLANK() by "inactive", the filter does not seem to work anymore.

Old measure : statut = if(ISBLANK([daysElapsed]),BLANK(),if([daysElapsed]<=10,"active","passive"))

New measure : statut = if(ISBLANK([daysElapsed]),"inactive",if([daysElapsed]<=10,"active","passive"))
Just replacing BLANK() by "inactive", I get this result :

 

The filter on my table shows that the date should be before 25/01/2022 but I get in my results some lines after 25/01/2022 ... (the ones for which status = "inactive").

 

Why do I get these lines ?

 

Thanks for your help ...

 

 





 

Need Help
  • Anonymous's avatar
    Anonymous
    4 years ago

    Hi  jsteffe ,

    Slicer just filters the data of the columns in the connexions table, but the measure will not be changed by the selection of the slicer

    You can use Flag to filter the date, only the date selected by the slicer is displayed in Visual

    Here are the steps you can follow：

    1. Create measure.

    Flag =
var _min=MIN('Calendar'[Date])
var _max=MAX('Calendar'[Date])
return
IF(
    MAX('connexions'[lastConnexionDate])>=_min&&MAX('connexions'[lastConnexionDate])<=_max,1,0)

    2. Place [Flag]in Filters, set is=1, apply filter.

    3. Result:

     

    Best Regards,

    Liu Yang

    If this post helps, then please consider Accept it as the solution to help the other members find it more quickly

6 Replies

  • Anonymous's avatar
    Anonymous
    Not applicable
    4 years ago

    Hi  jsteffe ,

    Slicer just filters the data of the columns in the connexions table, but the measure will not be changed by the selection of the slicer

    You can use Flag to filter the date, only the date selected by the slicer is displayed in Visual

    Here are the steps you can follow：

    1. Create measure.

    Flag =
var _min=MIN('Calendar'[Date])
var _max=MAX('Calendar'[Date])
return
IF(
    MAX('connexions'[lastConnexionDate])>=_min&&MAX('connexions'[lastConnexionDate])<=_max,1,0)

    2. Place [Flag]in Filters, set is=1, apply filter.

    3. Result:

     

    Best Regards,

    Liu Yang

    If this post helps, then please consider Accept it as the solution to help the other members find it more quickly

  • bcdobbs's avatar
    bcdobbs
    Community Champion
    4 years ago

    Is the date column in your table the same as the date column in your slicer?

    Could you share a picture of your model or a demo pbix file?

    • jsteffe's avatar
      jsteffe
      Helper III
      4 years ago

      I get 2 dates :
      - one in my table connexions (the one which is in the table)

      - one in my calendar date (which is in my slicer).

      I put a relationship betxeen these 2 dates in my model.

      You get the pbix file there :
      https://filez.agro-bordeaux.fr/xs57gp

       

      Thanks,

      • bcdobbs's avatar
        bcdobbs
        Community Champion
        4 years ago

        Ok, that's really made me think. Hoping Greg_Deckler, marcorusso  or AlbertoFerrari  can confirm my conclusion.

         

        I reduced it down as far I could to remove any issues I could think of and looked at the result query from the table in DAX studio. That included creating a very basic date table (NewDate) and replacing your status measure so it simply returns 1 regardless. Tidied up query in DAX Studio as follows:

         

         

        DEFINE
  VAR DateFilterTable = 
    FILTER(
      VALUES('NewDate'[Date]),
      'NewDate'[Date] < DATE(2022, 1, 26)
    )

  VAR ResultTable = 
    SUMMARIZECOLUMNS(
      'connexions'[lastConnexionDate],
      DateFilterTable,
      "status", 1
    )


EVALUATE
  ResultTable

ORDER BY
  'connexions'[lastConnexionDate] DESC

         


        Even in this simplified state you still get the same issue:

         

        Going back to the definition of SUMMARIZECOLUMNS which is what PowerBi uses in the background for that visual there's the following statement:

         

        "Filters in SUMMARIZECOLUMNS only apply to group-by columns from the same table and to measures. They do not apply to group-by columns from other tables directly, but indirectly through the implied non-empty filter from measures. In order to apply a filter to the group-by column unconditionally, apply the filter through a CALCULATETABLE function that evaluates SUMMARIZECOLUMNS."

        In short because you're grouping by the date column in your fact table the filter from the date table has no effect. In fact it never did however it looked like it was because your original measure was returning blank. (Note the line "indirectly through the implied non-empty filter from measures").

         

        In order to fix it you need to use the date column from your date table in the visual and then I suspect may have to tweak your original measure to turn it around.