Forum Discussion

miguelsus2000's avatar
miguelsus2000
Helper III
6 years ago
Solved

Help with getting the maximum value from calculated table containing measure column

Hi... i only want to display the maximum of each group for the calculated table below.  For example, for 0000-1040I =32, for 1040O=32, 10413=43, etc.  When i use MAX it complains the Counter per BID ...
Need Help
  • v-xuding-msft's avatar
    v-xuding-msft
    6 years ago

    Hi miguelsus2000 ,

    Miguel, I tested your sample data. Maybe the following formula can help you. For why you get the sum value, I think it is caused that my sample is too simple. It is filtered by other columns in your actual data.

     

    MAXX = 
MAXX (
    SUMMARIZE (
        FILTER (
            ALLSELECTED ( 'LoRaBlePayload (2)' ),
            'LoRaBlePayload (2)'[Content.BeaconIdentifier]
                IN FILTERS ( 'LoRaBlePayload (2)'[Content.BeaconIdentifier] )
        ),
        'LoRaBlePayload (2)'[Content.BeaconIdentifier],
        'LoRaBlePayload (2)'[PartitionKey],
        "New", [Count per BID]
    ),
    [New]
)

    Best Regards,

    Xue Ding

    If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

miguelsus2000's avatar
miguelsus2000
Helper III
6 years ago

Hi Xue,

 

Does the info I provided help in any way?  For some reason, i still cannot break down the 38 into 4 adn 34 you have?

 

Thank you...Miguel.

v-xuding-msft's avatar
v-xuding-msft
Community Support
6 years ago

Hi miguelsus2000 ,

Miguel, I tested your sample data. Maybe the following formula can help you. For why you get the sum value, I think it is caused that my sample is too simple. It is filtered by other columns in your actual data.

 

MAXX = 
MAXX (
    SUMMARIZE (
        FILTER (
            ALLSELECTED ( 'LoRaBlePayload (2)' ),
            'LoRaBlePayload (2)'[Content.BeaconIdentifier]
                IN FILTERS ( 'LoRaBlePayload (2)'[Content.BeaconIdentifier] )
        ),
        'LoRaBlePayload (2)'[Content.BeaconIdentifier],
        'LoRaBlePayload (2)'[PartitionKey],
        "New", [Count per BID]
    ),
    [New]
)

Best Regards,

Xue Ding

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

  • miguelsus2000's avatar
    miguelsus2000
    Helper III
    6 years ago

    Hi Xue, Thank you very much this actually worked.   The original calculation was indeed very simple/high level.  I wanted to ask you, if I want to extract the partitionkey mostly used, can simply do a value lookup? 

     

    No worries if you're busy.

     

    Thank you again!

    Cheers,
    M