Skip to main content
cancel
Showing results for 
Search instead for 
Did you mean: 

Find everything you need to get certified on Fabric—skills challenges, live sessions, exam prep, role guidance, and more. Get started

Reply
jayjay0306
Helper III
Helper III

Rolling average last 3 months

Hi,
I hope you can help me with a shallange:
I have a Power BI report, where I need to make a measure (I don't have access to the source table) which calculates the rolling average for the last 3 months.
And the rolling average shall be made on the sum per month (not rolling on the date value).
Example:
in the table below, I have the "Daily Sales-Sum per month" in 2019. The datasource is one table (not a datamodel with dimensions and facts), where leaf-level is transactions by date.
I need the rolling average on the monthly sum-values.

monthTable.PNG

I have tried to make the measure (please see below), but the result is wrong(table above).

 

DAX-Script:

--------------------------------------
Rolling Average 3 months =
VAR LastDate_ = LASTDATE(Table[Calendar Day])
RETURN
AVERAGEX(
DATESINPERIOD(
'Table'[Calendar Day];
LastDate_; -3; MONTH);
SUMX(
KEEPFILTERS(VALUES('Table'[Month]));
CALCULATE(SUM('Table'[Sales]))
)
)
---------------------------------------------

 

the result I need is this (here shown for the last two months, as an example):

monthTable2.PNG

 

Any ideas? All inputs will be greatly appreciated.

Thanks.

Br,

JayJay

2 ACCEPTED SOLUTIONS
Anonymous
Not applicable

How about this?

 

Rolling Average 3 months =
VAR LastDate_ =
    LASTDATE ( Table[Calendar Day] )
RETURN
    CALCULATE (
        AVERAGEX ( VALUES ( 'Table'[Month] ); CALCULATE ( SUM ( 'Table'[Sales] ) ) );
        FILTER (
            ALL ( Table );
            [Calendar Day] <= LastDate_
                && [Calendar Day] > DATEADD ( LastDate_; -3; MONTH )
        )
    )

 

Similar to yours, but i changed the table for AVERAGEX to iterate over to the month values. Also changed the calcualte filter a little bit.

View solution in original post

Excellent Ulf, that solved it 🙂

Thanks.

 

View solution in original post

14 REPLIES 14
WallyWallWal
Helper I
Helper I

I am not having any luck with this formula.  It keeps erroring out on me and I can't figure out where I am going wrong.  Trying to do 3-month rolling (hopefully dynamic) average.  For month 2021-02, 3 month average should be 15.3%  Can provide more data if needed.  Any help or direction would be welcomed.  Thanks!2021-03-10_15-02-04.jpg

 

I am struggling with the same issue. Do you have a solution yet?

JLincoln
Frequent Visitor

The Semicolons in the formula should be commas if you're working on it in America. Different syntax.

@EVIJ I ended up having to ask a coworker who has a brain that works like magic.  He suggested creating a CTE that joins the date table to itself.  Below is the code.  Not sure if this will help, but maybe it will give you some insight.  It did work for my purposes.

 

WITH ABC AS
(
SELECT
[SurveyCompletedOn]


, case when [Answer] = 'Not at all likely - 0' then 'Detractor'
when [Answer] = '1' then 'Detractor'
when [Answer] = '2' then 'Detractor'
when [Answer] = '3' then 'Detractor'
when [Answer] = '4' then 'Detractor'
when [Answer] = '5' then 'Detractor'
when [Answer] = '6' then 'Detractor'
when [Answer] = '7' then 'Passive'
when [Answer] = '8' then 'Passive'
when [Answer] = '9' then 'Promotor'
when [Answer] = 'Extremely likely - 10' then 'Promotor'
end as 'NPS Scoring'


, ROW_NUMBER()OVER (ORDER BY [SurveyCompletedOn]) AS LINE


FROM [Database]

WHERE [Question] LIKE @SURVEY_QUESTION
and [SurveyCompletedOn] is not null

 

 

, NUMBER2 AS
(
SELECT
CONVERT(VARCHAR(7),DATEADD(MONTH,-2,ABC1.SurveyCompletedOn),23) AS '3 MONTH BEGIN'
, CONVERT(VARCHAR(7),ABC1.SurveyCompletedOn,23) AS '3 MONTH END'
, ABC2.[NPS SCORING] AS 'NPS SCORING'
, COUNT(DISTINCT(ABC2.[LINE])) AS 'SCORING'

 

FROM ABC AS ABC1
    LEFT JOIN ABC AS ABC2
          ON CONVERT(VARCHAR(7),ABC2.SurveyCompletedOn,23) BETWEEN CONVERT(VARCHAR(7),DATEADD(MONTH,-2,ABC1.SurveyCompletedOn),23)

               AND CONVERT(VARCHAR(7),ABC1.SurveyCompletedOn,23)

 

GROUP BY

   CONVERT(VARCHAR(7),DATEADD(MONTH,-2,ABC1.SurveyCompletedOn),23)
, CONVERT(VARCHAR(7),ABC1.SurveyCompletedOn,23)
, ABC2.[NPS Scoring]

)


SELECT
NUM2.[3 MONTH END]
, SUM(CASE WHEN NUM2.[NPS SCORING] = 'PROMOTOR' THEN NUM2.SCORING ELSE NULL END) AS 'PROMOTOR' 
, SUM(CASE WHEN NUM2.[NPS SCORING] = 'DETRACTOR' THEN NUM2.SCORING ELSE NULL END) AS 'DETRACTOR' 
, CONVERT(NUMERIC(18,2),SUM(CASE WHEN NUM2.[NPS SCORING] = 'PROMOTOR' THEN NUM2.SCORING ELSE NULL END)) / (SUM(NUM2.SCORING)) AS 'PROMOTER 3MTH PERCENT'-- 
, CONVERT(NUMERIC(18,2),SUM(CASE WHEN NUM2.[NPS SCORING] = 'DETRACTOR' THEN NUM2.SCORING ELSE NULL END)) / (SUM(NUM2.SCORING)) AS 'DETRACTOR 3MTH PERCENT'--

,(CONVERT(NUMERIC(18,2),SUM(CASE WHEN NUM2.[NPS SCORING] = 'PROMOTOR' THEN NUM2.SCORING ELSE NULL END)) / (SUM(NUM2.SCORING)) - CONVERT(NUMERIC(18,2),SUM(CASE WHEN NUM2.[NPS SCORING] = 'DETRACTOR' THEN NUM2.SCORING ELSE NULL END)) / (SUM(NUM2.SCORING))) AS 'NPS ROLLING 3-MONTH AVERAGE PERCENTAGE' --

 

FROM NUMBER2 NUM2

 

GROUP BY
NUM2.[3 MONTH END]

arutsjak90
Helper I
Helper I

Hi, I have similar issue, I tried to modify you DAX but I have received circular error, could you help to solve it? I have changed first line after FILTER because I need to calculate rolling 3months average per Plant. My column Date, contains "real" date dd/mm/yyyy, (first day of each month)

3MonthsRollingAverage =

VAR LastDate_ =

LASTDATE ( COGSTotal[Date])

RETURN

CALCULATE (

AVERAGEX ( VALUES (COGSTotal[Date]), CALCULATE ( SUM ( COGSTotal[Total COGS] ) ) ),

FILTER (

COGSTotal,

COGSTotal[Plant]=EARLIER(COGSTotal[Plant]) &

[Date] <= LastDate_

&& [Date] > DATEADD ( LastDate_, -3, MONTH )) )

Anonymous
Not applicable

How about this?

 

Rolling Average 3 months =
VAR LastDate_ =
    LASTDATE ( Table[Calendar Day] )
RETURN
    CALCULATE (
        AVERAGEX ( VALUES ( 'Table'[Month] ); CALCULATE ( SUM ( 'Table'[Sales] ) ) );
        FILTER (
            ALL ( Table );
            [Calendar Day] <= LastDate_
                && [Calendar Day] > DATEADD ( LastDate_; -3; MONTH )
        )
    )

 

Similar to yours, but i changed the table for AVERAGEX to iterate over to the month values. Also changed the calcualte filter a little bit.

@Anonymous what if I have a separate Date Table separate from my Facts Table?

Anonymous
Not applicable

@jytech, it should be the same as long as you have set up a relationship between the tables. This is the preferred way to set up the model. Then filter the date table instead of the fact table in the measure.

Hi Ulf,

Brilliant! it works. 🙂

Thanks a lot.

The only remark I have is, that the rolling average doesn't react to the filters I have in the PBI report.

The value "Table[Sales]" is part of you calculation, but if I fx.filter on "Sales area" the "Sales" per month respond accordingly, but the rolling average remains the same. I find this a bit strange.

Can you tell me why?any ideas?

Thanks anyway.

Br,

Jakob

Anonymous
Not applicable

Yes, it's because of ALL(Table) in the filter. All filters are removed to be able to access previous months. It should be possible to modify the CALCULATE / FILTER expression to only remove the filters on date/year/month. To do that easier and better I suggest creating a connected date table instead of having the date columns in the "fact" table. Dimensional models are usually easier to work with in Power BI! Then you can do the same thing as now but on the date table  - ALL([NewDateTable]) instead of ALL(Table).

Excellent Ulf, that solved it 🙂

Thanks.

 

Anonymous
Not applicable

Good to hear the problem is solved! By the way, you should mark my answer as the answer, not your own post... 🙂

Greg_Deckler
Super User
Super User

I wrote this, Rolling Months Quick Measure: https://community.powerbi.com/t5/Quick-Measures-Gallery/Rolling-Months/m-p/391499#M124

 

Also, if that doesn't work, see if my Time Intelligence the Hard Way provides a different way of accomplishing what you are going for.

https://community.powerbi.com/t5/Quick-Measures-Gallery/Time-Intelligence-quot-The-Hard-Way-quot-TIT...

 

 


Follow on LinkedIn
@ me in replies or I'll lose your thread!!!
Instead of a Kudo, please vote for this idea
Become an expert!: Enterprise DNA
External Tools: MSHGQM
YouTube Channel!: Microsoft Hates Greg
Latest book!:
The Definitive Guide to Power Query (M)

DAX is easy, CALCULATE makes DAX hard...

Hi Greg,

thanks for your input. much appreciated. The solution didn't quite solve my problem, but I got wiser on DAX. 🙂

 

Helpful resources

Announcements
July 2024 Power BI Update

Power BI Monthly Update - July 2024

Check out the July 2024 Power BI update to learn about new features.

PBI_Carousel_NL_June

Fabric Community Update - June 2024

Get the latest Fabric updates from Build 2024, key Skills Challenge voucher deadlines, top blogs, forum posts, and product ideas.