topic COUNTROWS Returning Wrong Value in DAX Commands and Tips

COUNTROWS Returning Wrong Value

jguercio — Thu, 27 Jan 2022 16:14:25 GMT

I have a calculated column called Service Authorized in the FACT-Services table. Its intention is to make sure there is an authorization in place (FACT-BH Authorizations table) for the date of service. This DAX logic has performed in other contexts. The end result is a COUNTROWS of a table of any authorizations that meet the conditions. This will eventually become binary (1/0) but there is a problem with multiple overlapping authorizations, which the COUNTROWS should help track down.

For one case in question, the result of the calculated column is 5, indicating that there are 5 overlapping authorizations during the service date. But when I create a calculated table to see what is in the count, it only shows 1 row.

Any insights into this? Is there something in my DAX that is causing this?

Service Authorized = VAR AuthTable = FILTER( 'FACT-BH Authorizations' , 'FACT-Service'[Client ID] = 'FACT-BH Authorizations'[Client ID] && 'FACT-Service'[Contact Date] >= 'FACT-BH Authorizations'[AuthStart] && 'FACT-Service'[Contact Date] <= 'FACT-BH Authorizations'[AuthEnd] && IF( 'FACT-Service'[Program ID] = "30001013", 'FACT-BH Authorizations'[UCode] = "U749", IF( 'FACT-Service'[Program ID] = "30001075", 'FACT-BH Authorizations'[UCode] = "U649", IF( OR( 'FACT-Service'[Program ID] = "30001014", 'FACT-Service'[Program ID] = "30001015" ), 'FACT-BH Authorizations'[UCode] = "U349", IF( 'FACT-Service'[Program ID] = "30001005", 'FACT-BH Authorizations'[UCode] = "U749" || 'FACT-BH Authorizations'[UCode] = "U649" || 'FACT-BH Authorizations'[UCode] = "U349" ) ) ) ) ) RETURN COUNTROWS( AuthTable )

Re: COUNTROWS Returning Wrong Value

goncalogeraldes — Thu, 27 Jan 2022 16:26:47 GMT

Hello there jguercio ! Have you tried with a Summarize?

Service Authorized = VAR AuthTable = SUMMARIZE( FILTER( 'FACT-BH Authorizations' , 'FACT-Service'[Client ID] = 'FACT-BH Authorizations'[Client ID] && 'FACT-Service'[Contact Date] >= 'FACT-BH Authorizations'[AuthStart] && 'FACT-Service'[Contact Date] <= 'FACT-BH Authorizations'[AuthEnd] && IF( 'FACT-Service'[Program ID] = "30001013", 'FACT-BH Authorizations'[UCode] = "U749", IF( 'FACT-Service'[Program ID] = "30001075", 'FACT-BH Authorizations'[UCode] = "U649", IF( OR( 'FACT-Service'[Program ID] = "30001014", 'FACT-Service'[Program ID] = "30001015" ), 'FACT-BH Authorizations'[UCode] = "U349", IF( 'FACT-Service'[Program ID] = "30001005", 'FACT-BH Authorizations'[UCode] = "U749" || 'FACT-BH Authorizations'[UCode] = "U649" || 'FACT-BH Authorizations'[UCode] = "U349" ) ) ) ) ), 'FACT-Service'[Client ID], #for example "Rows", 1 ) RETURN SUM( [Rows] )

Hope this answer solves your problem!
If you need any additional help please @ me in your reply.
If my reply provided you with a solution, please consider marking it as a solution ✔️ or giving it a kudoe 👍
Thanks!

You can also check out my LinkedIn!

Best regards,
Gonçalo Geraldes

Re: COUNTROWS Returning Wrong Value

jguercio — Thu, 27 Jan 2022 18:31:31 GMT

Ultimately, there was a problem with the relationships that was fixed. However, your solution also works. Thank you.