Forum Discussion
Advocate IData Refresh error: "DM_GWPipeline_Gateway_CanceledError"
Hi sandy_ew ,
Thank you for reaching out to us on the Microsoft Fabric Community Forum.
Before it was a known issue but is resolved now .Please try to refresh it again and check it once.If you still face the same issue please raise a support ticket.
If this post was helpful, please give us Kudos and consider marking Accept as solution to assist other members in finding it more easily.
Regards,
Menaka
I had similar issues and updated the Gateway software.
The issue seemed unrelated though, turned out to be tcp/ip traffic rules causing the
problem. The vendor handling our internet connection had updated the traffic rules which started a variety of issues at work including the Gatway refreshes crashing repeatedly.
In the end the vendor had to roll back the updates, but also had to update firmware on the hardware as they
were one version behind. They then applied the rules in batches. Everything is fine now.
Make sure you don't have to tcp/ip issues, hardware is updated and check router configurations for your Lan to Wan connections
Advocate II do not know exactly which one but they did have to make adjustments for the Gateway traffic to and from powerbi.
I still belive their biggest problem was that they had not updated the wan device to the latest software and firmware version- foresightbi
Interesting.
Well we've tested with isolating our machines in the policy to be exempt from rules period to see if that would help but the problem remains for us. Our configuration on the networking side hasn't changed in YEARS for these machines and we even did the february upgrade in early March. This configuration has been fine for us until just last week.
It's hard to rationalize this being a configuration issue on the client side. My opinion is that this is an MS issue that's being resolved by workarounds on the client side.