Forum Discussion
Lookupvalue using dates?
Hello,
I am trying to divide a number in Table 1 by a number with the corresponding date in Table 2 to get a percentage.
| Table 1 | |
| Date | Decimal |
| 3/2/2019 | 0.9 |
| 3/2/2019 | 0.05 |
| 3/16/2019 | 0.37 |
| 3/16/2019 | 0.4 |
| 3/16/2019 | 0.36 |
| 4/27/2019 | 0.02 |
| 5/11/2019 | 1.36 |
| 5/11/2019 | 0.94 |
| Table 2 | |
| Date | Number |
| 3/2/2019 | 404.7 |
| 3/16/2019 | 405 |
| 4/27/2019 | 405.75 |
| 5/11/2019 | 406.1 |
Output I want:
| Output | |
| Date | Percent |
| 3/2/2019 | 0.22% |
| 3/2/2019 | 0.01% |
| 3/16/2019 | 0.09% |
| 3/16/2019 | 0.10% |
| 3/16/2019 | 0.09% |
| 4/27/2019 | 0.00% |
| 5/11/2019 | 0.33% |
| 5/11/2019 | 0.23% |
I was trying this but it's not working:
Percentage = Divide(sum(Table1[Decimal],Lookupvalue(Table2[Number],Table2[Date],Table1[Date]),0)
Can Lookupvalue be used for dates?
Any help would be appreciated. TYIA.
Iamnvt wrote:
It looks like you are writing a Measure, not calculated column. I think you should turn off the date hierarchy to have [.Month] off.
You can go to Model tab, and insert calculated column with the said formula. Check my PBI file for more details.Just want to close the loop on the question and address the date hierarchy.
The date hierarchy has been off and still the .[Month] etc. comes up.
I ended up using:
Measure = Divide(sum('Table1'[Decimal]),calculate(sum('Table2'[Number])),0)which seems to work. TY
9 Replies
hi,
you can use calculated column:
Calculated Column % = DIVIDE(Table1[Decimal], LOOKUPVALUE(Table2[Number],Table2[Date],Table1[Date]))
here is the PBI file:
https://1drv.ms/u/s!Aps8poidQa5zk6pa5KcbigH1gCmIYg
Hello, thank you for responding. What is the difference between what you posted and what I have in my question? The only difference I see is the "sum" portion. My issue is the lookupvalue does not work when I write it that way. After I put in the date column, I get a drop down that gives the following choices: .[Date], .[Day], .[Month], .[MonthNo], .[Quarter], .[QuarterNo], .[Year]
no matter which one I pick, it doesn't work.
Could it be an issue with the relationship between the tables?
- Hi,
In calculated column, it is refer to row context. When you use SUM in row context, it will sum up all the row values. You need to enable context transition to make SUM refer to one row.
You can do that by wrap up SUM with CALCULATE —> Calculate(Sum([Values]))
You need to have a separate Calendar table to link between the 2 tables. If that the case, then you dont need to use lookupvalue, but just DIVDE(SUM([Decimal],sum([Number]))
Iamnvt wrote:hi,
you can use calculated column:
Calculated Column % = DIVIDE(Table1[Decimal], LOOKUPVALUE(Table2[Number],Table2[Date],Table1[Date]))
here is the PBI file:
https://1drv.ms/u/s!Aps8poidQa5zk6pa5KcbigH1gCmIYg
I took it back a step and tried just getting the "Lookupvalue" function to work.
Each time when I get to "Table2[Date] I get options for ".Date" ".Month" etc and after I chose one there is no option to pick "Table1[Date]" as my third attribute.
If I manually type over or copy and paste what you have above, I get this error:
"A single value for column 'Date' in table 'Table1' cannot be determined. This can happen when a measure formula refers to a column that contains many values without specifying an aggregation such as min, max, count, or sum to get a single result."
Please let me know if you have any ideas on the error? TY.
- It looks like you are writing a Measure, not calculated column. I think you should turn off the date hierarchy to have [.Month] off.
You can go to Model tab, and insert calculated column with the said formula. Check my PBI file for more details.
Hi,
This calculated column works just fine.
Column = [Decimal]/LOOKUPVALUE(Table2[Number],Table2[Date],Table1[Date])
Hope this helps.
Ashish_Mathur wrote:Hi,
This calculated column works just fine.
Column = [Decimal]/LOOKUPVALUE(Table2[Number],Table2[Date],Table1[Date])
Hope this helps.
This doesn't work at all for me.
It says: "The value for 'Decimal' cannot be determined. Either 'Decimal' doesn't exist, or there is no current row for a column named 'Decimal'.
?? please let me know if you have any ideas.
Hi,
I cannot understand why it is not working. As can be seen in my screenshot, my formula works fine. I hope you are writing it as a calculated column formula (not as a measure).
