Forum Discussion
Return "Yes" or "No" based on Multiple Conditions
Hi Everyone,
I'm working on a collision dashboard/report where it would identify whether a driver requires retraining or not. The measure would return a value of "Yes" or "No" based on certain conditions. These conditions are as follows: Retraining is required for a driver with two non-preventable collisions within 18 months or if a collision is preventable. For everything else, the return value should be "No." I created a dax that worked for the first part (2 non-preventable over 18-mos) of the condition; however, I'm struggling with the 2nd part of the syntax. Please see below for reference:
Any assistance would be greatly appreciated. Thanks, in advance.
Hi, taskinosurname
You can try the following methods.
Sample data:Measure:
Difference = IF(SELECTEDVALUE('Table'[Last Collision Date])=BLANK(),0, ABS (DATEDIFF (SELECTEDVALUE ( 'Table'[Date] ), SELECTEDVALUE ( 'Table'[Last Collision Date] ),MONTH)))Retraining Req'd = IF (SELECTEDVALUE ( 'Table'[Last Collision Date] ) <> BLANK () && SELECTEDVALUE ( 'Table'[Type] ) = "Non Preventable" && [Difference] < 18, "Yes", IF (SELECTEDVALUE ( 'Table'[Last Collision Date] ) = BLANK () && SELECTEDVALUE ( 'Table'[Type] ) = "Preventable", "Yes", "No" ) )Is this the result you expect?
Best Regards,
Community Support Team _Charlotte
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
4 Replies
- v-zhangtiCommunity Support
Hi, taskinosurname
You can try the following methods.
Sample data:Measure:
Difference = IF(SELECTEDVALUE('Table'[Last Collision Date])=BLANK(),0, ABS (DATEDIFF (SELECTEDVALUE ( 'Table'[Date] ), SELECTEDVALUE ( 'Table'[Last Collision Date] ),MONTH)))Retraining Req'd = IF (SELECTEDVALUE ( 'Table'[Last Collision Date] ) <> BLANK () && SELECTEDVALUE ( 'Table'[Type] ) = "Non Preventable" && [Difference] < 18, "Yes", IF (SELECTEDVALUE ( 'Table'[Last Collision Date] ) = BLANK () && SELECTEDVALUE ( 'Table'[Type] ) = "Preventable", "Yes", "No" ) )Is this the result you expect?
Best Regards,
Community Support Team _Charlotte
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
- taskinosurnameFrequent Visitor
Thanks a million. This is what I was looking for. Given that I'm still relatively a novice with DAX, I would've never thought to put a measure within a measure. Thanks again.
Warm regards,
Taski
- djurecicSuper User
Hi taskinosurname ,
Maybe something like this using OR. Pleas double check the ().
Var _Retrain = COUNTROWS(FILTER(ALL('NRV Collision'),OR(('NRV Collision'[Driver/Reported by] = _Driver && 'NRV Collision'[Type] = "Non Preventable" && 'NRV Collision'[Date].[Date] >=_Date),('NRV Collision'[Driver/Reported by] = _Driver && 'NRV Collision'[Type] = "Preventable"))))Please accept as solution if this has answered the question- thanks!- taskinosurnameFrequent Visitor
Thank you for the quick response. I appreciate it.
I tried your possible solution with no success. Oddly enough, it's even counting Non-preventables' outside 18 months.